I continuously getting the the message that the Lin state has changed to UP and then DOWN and so forth.
I have tried to change the cable but that doesn't make any difference.
I'm running FreeNAS-11.3-U2 on the bare metal of a Dell r720XD (no virtualisation).
Here is my network setup:
I only have one of my network cards (bxe0) enabled and no Jumbo frames.
I can see there are others that have had similar issues but I don't see that they got the problem fixed. Any help or directions to a solution is highly appreciated.
Code:
Apr 21 18:34:23 nas kernel: bxe0: link state changed to UP Apr 21 19:07:23 nas kernel: bxe0: link state changed to DOWN Apr 21 19:07:23 nas kernel: bxe0: link state changed to DOWN Apr 21 19:07:28 nas kernel: bxe0: link state changed to UP Apr 21 19:07:28 nas kernel: bxe0: link state changed to UP Apr 21 19:22:04 nas kernel: bxe0: link state changed to DOWN Apr 21 19:22:04 nas kernel: bxe0: link state changed to DOWN Apr 21 19:22:04 nas kernel: bxe0: link state changed to UP Apr 21 19:22:04 nas kernel: bxe0: link state changed to UP Apr 21 19:26:51 nas kernel: bxe0: link state changed to DOWN Apr 21 19:26:51 nas kernel: bxe0: link state changed to DOWN Apr 21 19:26:51 nas kernel: bxe0: link state changed to UP Apr 21 19:26:51 nas kernel: bxe0: link state changed to UP Apr 21 19:28:27 nas kernel: bxe0: link state changed to DOWN Apr 21 19:28:27 nas kernel: bxe0: link state changed to DOWN Apr 21 19:28:27 nas kernel: bxe0: link state changed to UP Apr 21 19:28:27 nas kernel: bxe0: link state changed to UP Apr 21 19:52:04 nas kernel: bxe0: link state changed to DOWN Apr 21 19:52:04 nas kernel: bxe0: link state changed to DOWN Apr 21 19:52:04 nas kernel: bxe0: link state changed to UP Apr 21 19:52:04 nas kernel: bxe0: link state changed to UP Apr 21 20:05:32 nas kernel: bxe0: link state changed to DOWN Apr 21 20:05:32 nas kernel: bxe0: link state changed to DO
I have tried to change the cable but that doesn't make any difference.
I'm running FreeNAS-11.3-U2 on the bare metal of a Dell r720XD (no virtualisation).
Here is my network setup:
Code:
nas% ifconfig -a bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: 10G1 options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO> ether 90:b1:1c:0a:93:fc hwaddr 90:b1:1c:0a:93:fc inet 192.168.66.21 netmask 0xffffff00 broadcast 192.168.66.255 nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet autoselect (10Gbase-SR <full-duplex>) status: active bxe1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO> ether 90:b1:1c:0a:93:fe hwaddr 90:b1:1c:0a:93:fe nd6 options=1<PERFORMNUD> media: Ethernet autoselect (none) status: no carrier bxe2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO> ether 90:b1:1c:0a:94:00 hwaddr 90:b1:1c:0a:94:00 nd6 options=1<PERFORMNUD> media: Ethernet autoselect (none) status: no carrier bxe3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO> ether 90:b1:1c:0a:94:02 hwaddr 90:b1:1c:0a:94:02 nd6 options=1<PERFORMNUD> media: Ethernet autoselect (none) status: no carrier lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo nas%
I only have one of my network cards (bxe0) enabled and no Jumbo frames.
I can see there are others that have had similar issues but I don't see that they got the problem fixed. Any help or directions to a solution is highly appreciated.