kernel log message pid 32431 (pkg), uid 0: exited on signal 10 (core dumped)

[MarioW]

Hello all,

I built my FreeNAS system not long ago and after a while I activated the e-mail notification.

On daily basis I get the following message sent via the e-mail notification:

Code:

MW-FreeNAS.MW-NET kernel log messages:
> pid 32431 (pkg), uid 0: exited on signal 10 (core dumped)

-- End of security output --

Anyone got an idea what I could check out to gather any more information?

 

[dlavigne]

Anything else around that error in /var/log/messages ?

 

[MarioW]

Hello dlavigne, thanks for the reply.
I checked - The last entries from /var/log/messages are only...

Code:

Oct 20 00:00:00 MW-FreeNAS syslog-ng[2544]: Configuration reload request received, reloading configuration;
Oct 20 00:00:00 MW-FreeNAS syslog-ng[2544]: Configuration reload finished;
Oct 20 03:01:17 MW-FreeNAS kernel: pid 35018 (pkg), uid 0: exited on signal 10 (core dumped)
Oct 21 00:00:00 MW-FreeNAS syslog-ng[2544]: Configuration reload request received, reloading configuration;
Oct 21 00:00:00 MW-FreeNAS syslog-ng[2544]: Configuration reload finished;
Oct 21 03:01:07 MW-FreeNAS kernel: pid 76078 (pkg), uid 0: exited on signal 10 (core dumped)

Just in case I miss something, here is the log since the last reboot:

Code:

Oct 19 08:55:30 MW-FreeNAS syslog-ng[2544]: syslog-ng starting up; version='3.20.1'
Oct 19 08:55:30 MW-FreeNAS Copyright (c) 1992-2018 The FreeBSD Project.
Oct 19 08:55:30 MW-FreeNAS Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Oct 19 08:55:30 MW-FreeNAS     The Regents of the University of California. All rights reserved.
Oct 19 08:55:30 MW-FreeNAS FreeBSD is a registered trademark of The FreeBSD Foundation.
Oct 19 08:55:30 MW-FreeNAS FreeBSD 11.2-STABLE #0 r325575+5920981193f(HEAD): Mon Sep 16 23:00:13 UTC 2019
Oct 19 08:55:30 MW-FreeNAS root@nemesis:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
Oct 19 08:55:30 MW-FreeNAS FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
Oct 19 08:55:30 MW-FreeNAS VT(vga): resolution 640x480
Oct 19 08:55:30 MW-FreeNAS CPU: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz (3000.15-MHz K8-class CPU)
Oct 19 08:55:30 MW-FreeNAS Origin="GenuineIntel"  Id=0x906e9  Family=0x6  Model=0x9e  Stepping=9
Oct 19 08:55:30 MW-FreeNAS Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Oct 19 08:55:30 MW-FreeNAS Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Oct 19 08:55:30 MW-FreeNAS AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Oct 19 08:55:30 MW-FreeNAS AMD Features2=0x121<LAHF,ABM,Prefetch>
Oct 19 08:55:30 MW-FreeNAS Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Oct 19 08:55:30 MW-FreeNAS Structured Extended Features3=0x9c002400<IBPB,STIBP,SSBD>
Oct 19 08:55:30 MW-FreeNAS XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
Oct 19 08:55:30 MW-FreeNAS VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Oct 19 08:55:30 MW-FreeNAS TSC: P-state invariant, performance statistics
Oct 19 08:55:30 MW-FreeNAS real memory  = 17179869184 (16384 MB)
Oct 19 08:55:30 MW-FreeNAS avail memory = 16369455104 (15611 MB)
Oct 19 08:55:30 MW-FreeNAS Event timer "LAPIC" quality 600
Oct 19 08:55:30 MW-FreeNAS ACPI APIC Table: < >
Oct 19 08:55:30 MW-FreeNAS FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Oct 19 08:55:30 MW-FreeNAS FreeBSD/SMP: 1 package(s) x 4 core(s)
Oct 19 08:55:30 MW-FreeNAS WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Oct 19 08:55:30 MW-FreeNAS ioapic0 <Version 2.0> irqs 0-23 on motherboard
Oct 19 08:55:30 MW-FreeNAS SMP: AP CPU #2 Launched!
Oct 19 08:55:30 MW-FreeNAS SMP: AP CPU #3 Launched!
Oct 19 08:55:30 MW-FreeNAS SMP: AP CPU #1 Launched!
Oct 19 08:55:30 MW-FreeNAS Timecounter "TSC-low" frequency 1500075386 Hz quality 1000
Oct 19 08:55:30 MW-FreeNAS random: entropy device external interface
Oct 19 08:55:30 MW-FreeNAS random: registering fast source Intel Secure Key RNG
Oct 19 08:55:30 MW-FreeNAS random: fast provider: "Intel Secure Key RNG"
Oct 19 08:55:30 MW-FreeNAS kbd1 at kbdmux0
Oct 19 08:55:30 MW-FreeNAS nexus0
Oct 19 08:55:30 MW-FreeNAS vtvga0: <VT VGA driver> on motherboard
Oct 19 08:55:30 MW-FreeNAS cryptosoft0: <software crypto> on motherboard
Oct 19 08:55:30 MW-FreeNAS aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
Oct 19 08:55:30 MW-FreeNAS padlock0: No ACE support.
Oct 19 08:55:30 MW-FreeNAS acpi0: <SUPERM SUPERM> on motherboard
Oct 19 08:55:30 MW-FreeNAS acpi0: Power Button (fixed)
Oct 19 08:55:30 MW-FreeNAS unknown: memory range not supported
Oct 19 08:55:30 MW-FreeNAS cpu0: <ACPI CPU> on acpi0
Oct 19 08:55:30 MW-FreeNAS cpu1: <ACPI CPU> on acpi0
Oct 19 08:55:30 MW-FreeNAS cpu2: <ACPI CPU> on acpi0
Oct 19 08:55:30 MW-FreeNAS cpu3: <ACPI CPU> on acpi0
Oct 19 08:55:30 MW-FreeNAS hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Oct 19 08:55:30 MW-FreeNAS Timecounter "HPET" frequency 24000000 Hz quality 950
Oct 19 08:55:30 MW-FreeNAS Event timer "HPET" frequency 24000000 Hz quality 550
Oct 19 08:55:30 MW-FreeNAS Event timer "HPET1" frequency 24000000 Hz quality 440
Oct 19 08:55:30 MW-FreeNAS Event timer "HPET2" frequency 24000000 Hz quality 440
Oct 19 08:55:30 MW-FreeNAS Event timer "HPET3" frequency 24000000 Hz quality 440
Oct 19 08:55:30 MW-FreeNAS Event timer "HPET4" frequency 24000000 Hz quality 440
Oct 19 08:55:30 MW-FreeNAS atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Oct 19 08:55:30 MW-FreeNAS atrtc0: Warning: Couldn't map I/O.
Oct 19 08:55:30 MW-FreeNAS atrtc0: registered as a time-of-day clock, resolution 1.000000s
Oct 19 08:55:30 MW-FreeNAS Event timer "RTC" frequency 32768 Hz quality 0
Oct 19 08:55:30 MW-FreeNAS attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Oct 19 08:55:30 MW-FreeNAS Timecounter "i8254" frequency 1193182 Hz quality 0
Oct 19 08:55:30 MW-FreeNAS Event timer "i8254" frequency 1193182 Hz quality 100
Oct 19 08:55:30 MW-FreeNAS Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
Oct 19 08:55:30 MW-FreeNAS acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
Oct 19 08:55:30 MW-FreeNAS pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Oct 19 08:55:30 MW-FreeNAS pci0: <ACPI PCI bus> on pcib0
Oct 19 08:55:30 MW-FreeNAS pci0: <old, non-VGA display device> at device 19.0 (no driver attached)
Oct 19 08:55:30 MW-FreeNAS xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf300000-0xdf30ffff irq 16 at device 20.0 on pci0
Oct 19 08:55:30 MW-FreeNAS xhci0: 32 bytes context size, 64-bit DMA
Oct 19 08:55:30 MW-FreeNAS usbus0 on xhci0
Oct 19 08:55:30 MW-FreeNAS usbus0: 5.0Gbps Super Speed USB v3.0
Oct 19 08:55:30 MW-FreeNAS pci0: <simple comms> at device 22.0 (no driver attached)
Oct 19 08:55:30 MW-FreeNAS pci0: <simple comms> at device 22.1 (no driver attached)
Oct 19 08:55:30 MW-FreeNAS ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xdf310000-0xdf311fff,0xdf31e000-0xdf31e0ff,0xdf31d000-0xdf31d7ff irq 16 at device 23.0 on pci0
Oct 19 08:55:30 MW-FreeNAS ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
Oct 19 08:55:30 MW-FreeNAS ahcich0: <AHCI channel> at channel 0 on ahci0
Oct 19 08:55:30 MW-FreeNAS ahcich1: <AHCI channel> at channel 1 on ahci0
Oct 19 08:55:30 MW-FreeNAS ahcich2: <AHCI channel> at channel 2 on ahci0
Oct 19 08:55:30 MW-FreeNAS ahcich3: <AHCI channel> at channel 3 on ahci0
Oct 19 08:55:30 MW-FreeNAS ahcich4: <AHCI channel> at channel 4 on ahci0
Oct 19 08:55:30 MW-FreeNAS ahcich5: <AHCI channel> at channel 5 on ahci0
Oct 19 08:55:30 MW-FreeNAS ahcich6: <AHCI channel> at channel 6 on ahci0
Oct 19 08:55:30 MW-FreeNAS ahcich7: <AHCI channel> at channel 7 on ahci0
Oct 19 08:55:30 MW-FreeNAS pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Oct 19 08:55:30 MW-FreeNAS pci1: <ACPI PCI bus> on pcib1
Oct 19 08:55:30 MW-FreeNAS pcib2: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
Oct 19 08:55:30 MW-FreeNAS pci2: <ACPI PCI bus> on pcib2
Oct 19 08:55:30 MW-FreeNAS igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xdf200000-0xdf27ffff,0xdf280000-0xdf283fff irq 16 at device 0.0 on pci2
Oct 19 08:55:30 MW-FreeNAS igb0: Using MSIX interrupts with 5 vectors
Oct 19 08:55:30 MW-FreeNAS igb0: Ethernet address: ac:1f:6b:f2:56:90
Oct 19 08:55:30 MW-FreeNAS igb0: Bound queue 0 to cpu 0
Oct 19 08:55:30 MW-FreeNAS igb0: Bound queue 1 to cpu 1
Oct 19 08:55:30 MW-FreeNAS igb0: Bound queue 2 to cpu 2
Oct 19 08:55:30 MW-FreeNAS igb0: Bound queue 3 to cpu 3
Oct 19 08:55:30 MW-FreeNAS pcib3: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0
Oct 19 08:55:30 MW-FreeNAS pci3: <ACPI PCI bus> on pcib3
Oct 19 08:55:30 MW-FreeNAS igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xdf100000-0xdf17ffff,0xdf180000-0xdf183fff irq 17 at device 0.0 on pci3
Oct 19 08:55:30 MW-FreeNAS igb1: Using MSIX interrupts with 5 vectors
Oct 19 08:55:30 MW-FreeNAS igb1: Ethernet address: ac:1f:6b:f2:56:91
Oct 19 08:55:30 MW-FreeNAS igb1: Bound queue 0 to cpu 0
Oct 19 08:55:30 MW-FreeNAS igb1: Bound queue 1 to cpu 1
Oct 19 08:55:30 MW-FreeNAS igb1: Bound queue 2 to cpu 2
Oct 19 08:55:30 MW-FreeNAS igb1: Bound queue 3 to cpu 3
Oct 19 08:55:30 MW-FreeNAS pcib4: <ACPI PCI-PCI bridge> irq 18 at device 29.2 on pci0
Oct 19 08:55:30 MW-FreeNAS pci4: <ACPI PCI bus> on pcib4
Oct 19 08:55:30 MW-FreeNAS pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
Oct 19 08:55:30 MW-FreeNAS pci5: <ACPI PCI bus> on pcib5
Oct 19 08:55:30 MW-FreeNAS vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 18 at device 0.0 on pci5
Oct 19 08:55:30 MW-FreeNAS vgapci0: Boot video device
Oct 19 08:55:30 MW-FreeNAS isab0: <PCI-ISA bridge> at device 31.0 on pci0
Oct 19 08:55:30 MW-FreeNAS isa0: <ISA bus> on isab0
Oct 19 08:55:30 MW-FreeNAS pci0: <memory> at device 31.2 (no driver attached)
Oct 19 08:55:30 MW-FreeNAS acpi_button0: <Sleep Button> on acpi0
Oct 19 08:55:30 MW-FreeNAS acpi_button1: <Power Button> on acpi0
Oct 19 08:55:30 MW-FreeNAS acpi_tz0: <Thermal Zone> on acpi0
Oct 19 08:55:30 MW-FreeNAS acpi_tz1: <Thermal Zone> on acpi0
Oct 19 08:55:30 MW-FreeNAS uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Oct 19 08:55:30 MW-FreeNAS uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
Oct 19 08:55:30 MW-FreeNAS ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
Oct 19 08:55:30 MW-FreeNAS ipmi0: KCS mode found at io 0xca2 on acpi
Oct 19 08:55:30 MW-FreeNAS orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
Oct 19 08:55:30 MW-FreeNAS coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Oct 19 08:55:30 MW-FreeNAS est0: <Enhanced SpeedStep Frequency Control> on cpu0
Oct 19 08:55:30 MW-FreeNAS coretemp1: <CPU On-Die Thermal Sensors> on cpu1
Oct 19 08:55:30 MW-FreeNAS est1: <Enhanced SpeedStep Frequency Control> on cpu1
Oct 19 08:55:30 MW-FreeNAS coretemp2: <CPU On-Die Thermal Sensors> on cpu2
Oct 19 08:55:30 MW-FreeNAS est2: <Enhanced SpeedStep Frequency Control> on cpu2
Oct 19 08:55:30 MW-FreeNAS coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Oct 19 08:55:30 MW-FreeNAS est3: <Enhanced SpeedStep Frequency Control> on cpu3
Oct 19 08:55:30 MW-FreeNAS ZFS filesystem version: 5
Oct 19 08:55:30 MW-FreeNAS ZFS storage pool version: features support (5000)
Oct 19 08:55:30 MW-FreeNAS Timecounters tick every 1.000 msec
Oct 19 08:55:30 MW-FreeNAS freenas_sysctl: adding account.
Oct 19 08:55:30 MW-FreeNAS freenas_sysctl: adding directoryservice.
Oct 19 08:55:30 MW-FreeNAS freenas_sysctl: adding middlewared.
Oct 19 08:55:30 MW-FreeNAS freenas_sysctl: adding network.
Oct 19 08:55:30 MW-FreeNAS freenas_sysctl: adding services.
Oct 19 08:55:30 MW-FreeNAS ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
Oct 19 08:55:30 MW-FreeNAS ipmi0: IPMI device rev. 1, firmware rev. 1.56, version 2.0
Oct 19 08:55:30 MW-FreeNAS ipmi0: Number of channels 2
Oct 19 08:55:30 MW-FreeNAS ipmi0: Attached watchdog
Oct 19 08:55:30 MW-FreeNAS ugen0.1: <0x8086 XHCI root HUB> at usbus0
Oct 19 08:55:30 MW-FreeNAS uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Oct 19 08:55:30 MW-FreeNAS uhub0: 26 ports with 26 removable, self powered
Oct 19 08:55:30 MW-FreeNAS ugen0.2: <vendor 0x0557 product 0x7000> at usbus0
Oct 19 08:55:30 MW-FreeNAS uhub1 on uhub0
Oct 19 08:55:30 MW-FreeNAS uhub1: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0
Oct 19 08:55:30 MW-FreeNAS uhub1: 4 ports with 3 removable, self powered
Oct 19 08:55:30 MW-FreeNAS ugen0.3: <vendor 0x0557 product 0x2419> at usbus0
Oct 19 08:55:30 MW-FreeNAS ukbd0 on uhub1
Oct 19 08:55:30 MW-FreeNAS ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
Oct 19 08:55:30 MW-FreeNAS kbd2 at ukbd0
Oct 19 08:55:30 MW-FreeNAS ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Oct 19 08:55:30 MW-FreeNAS ada0: <WDC WDS120G2G0A-00JH30 UE500000> ACS-2 ATA SATA 3.x device
Oct 19 08:55:30 MW-FreeNAS ada0: Serial Number 19119E804474
Oct 19 08:55:30 MW-FreeNAS ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
Oct 19 08:55:30 MW-FreeNAS ada0: Command Queueing enabled
Oct 19 08:55:30 MW-FreeNAS ada0: 114480MB (234455040 512 byte sectors)
Oct 19 08:55:30 MW-FreeNAS ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
Oct 19 08:55:30 MW-FreeNAS ada1: <WDC WDS500G2B0A X61190WD> ACS-4 ATA SATA 3.x device
Oct 19 08:55:30 MW-FreeNAS ada1: Serial Number 19264C804032
Oct 19 08:55:30 MW-FreeNAS ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
Oct 19 08:55:30 MW-FreeNAS ada1: Command Queueing enabled
Oct 19 08:55:30 MW-FreeNAS ada1: 476940MB (976773168 512 byte sectors)
Oct 19 08:55:30 MW-FreeNAS ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
Oct 19 08:55:30 MW-FreeNAS ada2: <ST8000NE0004-1ZF11G EN01> ACS-3 ATA SATA 3.x device
Oct 19 08:55:30 MW-FreeNAS ada2: Serial Number ZA2BJ69V
Oct 19 08:55:30 MW-FreeNAS ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Oct 19 08:55:30 MW-FreeNAS ada2: Command Queueing enabled
Oct 19 08:55:30 MW-FreeNAS ada2: 7630885MB (15628053168 512 byte sectors)
Oct 19 08:55:30 MW-FreeNAS ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
Oct 19 08:55:30 MW-FreeNAS ada3: <ST8000NE0004-1ZF11G EN01> ACS-3 ATA SATA 3.x device
Oct 19 08:55:30 MW-FreeNAS ada3: Serial Number ZA2BJ65R
Oct 19 08:55:30 MW-FreeNAS ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Oct 19 08:55:30 MW-FreeNAS ada3: Command Queueing enabled
Oct 19 08:55:30 MW-FreeNAS ada3: 7630885MB (15628053168 512 byte sectors)
Oct 19 08:55:30 MW-FreeNAS random: unblocking device.
Oct 19 08:55:30 MW-FreeNAS Trying to mount root from zfs:freenas-boot/ROOT/default []...
Oct 19 08:55:30 MW-FreeNAS GEOM_MIRROR: Device mirror/swap0 launched (2/2).
Oct 19 08:55:30 MW-FreeNAS GEOM_ELI: Device mirror/swap0.eli created.
Oct 19 08:55:30 MW-FreeNAS GEOM_ELI: Encryption: AES-XTS 128
Oct 19 08:55:30 MW-FreeNAS GEOM_ELI:     Crypto: hardware
Oct 19 08:55:30 MW-FreeNAS pmc: Unknown Intel CPU.
Oct 19 08:55:30 MW-FreeNAS hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
Oct 19 08:55:30 MW-FreeNAS kernel: lagg0: link state changed to DOWN
Oct 19 08:55:30 MW-FreeNAS kernel: lagg0: link state changed to DOWN
Oct 19 08:55:30 MW-FreeNAS kernel: igb1: link state changed to UP
Oct 19 08:55:30 MW-FreeNAS kernel: igb1: link state changed to UP
Oct 19 08:55:30 MW-FreeNAS kernel: lagg0: link state changed to UP
Oct 19 08:55:30 MW-FreeNAS kernel: lagg0: link state changed to UP
Oct 19 08:55:30 MW-FreeNAS kernel: igb0: link state changed to UP
Oct 19 08:55:30 MW-FreeNAS kernel: igb0: link state changed to UP
Oct 19 08:55:30 MW-FreeNAS ums0 on uhub1
Oct 19 08:55:30 MW-FreeNAS ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
Oct 19 08:55:30 MW-FreeNAS ums0: 3 buttons and [Z] coordinates ID=0
Oct 19 08:55:30 MW-FreeNAS ntpd[3036]: ntpd 4.2.8p11-a (1): Starting
Oct 20 00:00:00 MW-FreeNAS syslog-ng[2544]: Configuration reload request received, reloading configuration;
Oct 20 00:00:00 MW-FreeNAS syslog-ng[2544]: Configuration reload finished;
Oct 20 03:01:17 MW-FreeNAS kernel: pid 35018 (pkg), uid 0: exited on signal 10 (core dumped)
Oct 21 00:00:00 MW-FreeNAS syslog-ng[2544]: Configuration reload request received, reloading configuration;
Oct 21 00:00:00 MW-FreeNAS syslog-ng[2544]: Configuration reload finished;
Oct 21 03:01:07 MW-FreeNAS kernel: pid 76078 (pkg), uid 0: exited on signal 10 (core dumped)

 

[dlavigne]

Did you shut the system down at midnight or did it reboot itself? If it wasn't you, any tasks running at that time?

 

[MarioW]

No, no shutdown and no automatic reboot. The system is up for several days.
I checked the tasks - but nothing that is configured to run each day at this time.

Just to put everything on the table: I also have another problem:
https://www.ixsystems.com/community/threads/boot-pool-degraded-even-after-replacement.79653

Each night at 3:00 AM I get two mails:
- a mail about the DEGRADED boot pool(daily run output).
- a mail "daily security run output" with the same message, just with another process Id:


> pid 17381 (pkg), uid 0: exited on signal 10 (core dumped)
..
> pid 76078 (pkg), uid 0: exited on signal 10 (core dumped)
..
> pid 35018 (pkg), uid 0: exited on signal 10 (core dumped)

I am doing ok with Linux, but I am really new to FreeBSD....
So I am not even really aware of what "pkg" is doing. It seems to be a package manager, but I have no Idea what this could mean.
Is there something like a automatic check for SW updates maybe?

 

[Jailer]

It's likely related to your degraded boot pool. That needs to be addressed. Save a copy of your configuration, disable trim on your boot drive and reinstall FreeNAS and re upload your saved config. The trim bug is a known problem with the WD green SSD's.

 

[MarioW]

It's likely related to your degraded boot pool. That needs to be addressed. Save a copy of your configuration, disable trim on your boot drive and reinstall FreeNAS and re upload your saved config. The trim bug is a known problem with the WD green SSD's.

Hi @Jailer - I took your advice and first tried to solve this problem.
It worked! I replaced the SSD with a SuperMicro SuperDOM: https://www.ixsystems.com/community...ded-even-after-replacement.79653/#post-554696

Now everything seems to be fine!