iSCSI lost

[grundholm]

Hi, I need some help, after a reboot FreeNAS did not boot correct, but I managed to boot it in verbose mode.

It seems like all configuration is lost and I don't know how to connect to the iSCSI target. I did import the storage volume (/mnt/Data) and under View Volumes I see that the volume is mounted and space is used. Now how do I get in contact with my ISCSI target and all the files?

I use FreeNAS-11.0-U4 on a SuperMicro server with 6x2TB and 8TB iSCSI Target - system is booting from a USB Stick.

 

[dlavigne]

I'd be more curious on why it did not boot correctly. Anything in /var/log/messages?

 

[grundholm]

I now powered the machine off, installed on a new USB stick - didn't do any settings, powered it off again and put back the old USB-stick and it booted normal. So the problem was a bad USB-stick. I'm new to FreeNAS and now learned to make a backup of the settings and the USB-stick...