nathank1989
Contributor
- Joined
- Aug 29, 2016
- Messages
- 103
I have begun using 11.2-BETA2 on a home system.
I am using an ASRock Rack D1540d4i which comes with two onboard gigabit NICS.
I have a UniFi network stack with 3 vlans, 10.0.0.0/24 (CORE); 10.10.0.0/24 (LAN); 10.20.0.0/24 (SOHO)
I have read https://forums.freenas.org/index.php?threads/multiple-network-interfaces-on-a-single-subnet.20204/
and https://forums.freenas.org/index.php?threads/lacp-friend-or-foe.30541/
and decided against agg because I will have less than 10 busy clients, and want jails on one subnet while mgmt and file serv is on another.
I want the management IP to be on CORE, and accessible from all my vlans, I also want my NFS and SMB shares off of this vlan through the igb0 interface
I want two iocage jails to go through igb1 interface on the SOHO vland accessible from other vlans.
I went into this thinking it was simpler than it is, and I don't know where to begin to get this to work correctly. I have tried manually adding vlans, interfaces, setting jails static, I just can't get the scenario I want to happen and I am beginning to question whether it is best practice.
I am using an ASRock Rack D1540d4i which comes with two onboard gigabit NICS.
I have a UniFi network stack with 3 vlans, 10.0.0.0/24 (CORE); 10.10.0.0/24 (LAN); 10.20.0.0/24 (SOHO)
I have read https://forums.freenas.org/index.php?threads/multiple-network-interfaces-on-a-single-subnet.20204/
and https://forums.freenas.org/index.php?threads/lacp-friend-or-foe.30541/
and decided against agg because I will have less than 10 busy clients, and want jails on one subnet while mgmt and file serv is on another.
I want the management IP to be on CORE, and accessible from all my vlans, I also want my NFS and SMB shares off of this vlan through the igb0 interface
I want two iocage jails to go through igb1 interface on the SOHO vland accessible from other vlans.
I went into this thinking it was simpler than it is, and I don't know where to begin to get this to work correctly. I have tried manually adding vlans, interfaces, setting jails static, I just can't get the scenario I want to happen and I am beginning to question whether it is best practice.