JamesT42
Dabbler
- Joined
- Jan 11, 2017
- Messages
- 13
Hi!
Is this bug known to someone? I tried searching it but no luck so far.
I'm trying to upgrade my jails from 11.2 to 11.3. But the iocage fetch is taking forever to finish, is this normal? Also it seems the whole system slows down while this is running, after a while the webinterface is not responding, samba service down, I got an email saying smartd is not running, console commands don't execute in the ssh session I had opened before, I can not login in the hardware console because after entering the username nothing happens. I had a top running and there was not much happening. Only thing I can do is reset. Also after this disaster whenever i start jails the system slows down massively, samba acces takes severals seconds for every folder, webinterface is slow. With no jails everything is ok speed-wise. I don't understand what is going on.
This happened on 11.3-U2.1 and is repeatable on 11.3-U3.2 after update.
I do not think this is hardwar related, but here are the system specs:
What can I do? Can I rebuild iocage from scratch somehow and keep my old jails?
Cheers
James
Is this bug known to someone? I tried searching it but no luck so far.
I'm trying to upgrade my jails from 11.2 to 11.3. But the iocage fetch is taking forever to finish, is this normal? Also it seems the whole system slows down while this is running, after a while the webinterface is not responding, samba service down, I got an email saying smartd is not running, console commands don't execute in the ssh session I had opened before, I can not login in the hardware console because after entering the username nothing happens. I had a top running and there was not much happening. Only thing I can do is reset. Also after this disaster whenever i start jails the system slows down massively, samba acces takes severals seconds for every folder, webinterface is slow. With no jails everything is ok speed-wise. I don't understand what is going on.
This happened on 11.3-U2.1 and is repeatable on 11.3-U3.2 after update.
Code:
root@freenas1:~ # iocage upgrade -r 11.3-RELEASE qbittorrent Snapshotting qbittorrent... Snapshot already exists Updating plugin INDEX... Running upgrade... 11.3-RELEASE is missing 'src.txz', please refetch! root@freenas1:~ # iocage fetch 11.3-RELEASE [0] 11.2-RELEASE (EOL) [1] 11.3-RELEASE [2] 11.4-RELEASE [3] 12.0-RELEASE (EOL) [4] 12.1-RELEASE Type the number of the desired RELEASE Press [Enter] to fetch the default selection: (11.3-RELEASE) Type EXIT to quit: 1 Fetching: 11.3-RELEASE Extracting: base.txz... Extracting: lib32.txz... src.txz missing, will try to redownload! Downloading: src.txz [####################] 100% Extracting: src.txz...
I do not think this is hardwar related, but here are the system specs:
Motherboard make and model - HP Microserver Gen8
CPU make and model - Intel Xeon E3-1265L
RAM quantity - 16GB ECC
Hard drives, quantity, model numbers, and RAID configuration, including boot drives
Boot drive: Some WD Green SSD in USB enclosure Jails: 1 ST1000LM014 (no raid level) Mass storage: 4 WDC WD120EFAX in RaidZ1
Hard disk controllers - integrated in mainboard
Network cards - Mellanox ConnectX 10G
What can I do? Can I rebuild iocage from scratch somehow and keep my old jails?
Cheers
James