Installed 2 used sata disks, now stuck on boot

[tibblist]

https://i.imgur.com/8GFk1GO.png

This is the console output that freenas booting gets stuck at. I have dual boot usbs and doubt both died at the exact same time. The only thing that has changed since shutdown was hooking up 2 new disks. Could they be causing it to get stuck loading? If so is there any way to force it past this and then fix the disks? This is a somewhat unique situation the disks were previously attached by SAS by accident and have now been connected via sata if maybe it is recognizing the disks on bootup as previously connected but getting stuck because they are hooked up differently.

 

[tibblist]

Removing the drives got it to boot, any idea if there is a way to fix this so it can boot with the drives? How are they stopping it from booting?

 

[jgreco]

Blank the drives with dban.