I have two of the same HDD controllers (Intel SASUC8I PCI-Express x8 SATA / SAS (Serial Attached SCSI) Controller Card), in the system they would be mpt0 and mpt1. All 16 drives are detected in the boot up, drives da0 through da15. When the unit boots up, all things are the same for the two of them except for mpt0 I get the following comments:
mpt0: request 0xffffff80003b3a80:1379 timed out for cob 0xffffff0003f4a800 (req->ccb 0xffffff0003f4a800
mpt0: attempting to abort req 0xffffff80003b3a80:1379 function 0
mpt0: mpt_wait_req(1) timed out
mpt0: mpt_recover_commands: abort timed-out. Resetting controller
mpt0: mpt_cam_event: 0x0
mpt0: mpt_cam_event: 0x0
mpt0: completing timedout/aborted req 0xffffff80003b3a80:1379
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x16
Does this mean the controller card died or something? I know when I first bought it it did pick up drives on it, and they worked. The drives I have connected to it do not show up in the gui, but I can access them through the shell, which does not help because zpools created in the shell do not carry over to the gui, nor are they carried over after a reboot, mine always say the drives I created the zpool on are corrupted and I have to gpart delete the partition. Help?
mpt0: request 0xffffff80003b3a80:1379 timed out for cob 0xffffff0003f4a800 (req->ccb 0xffffff0003f4a800
mpt0: attempting to abort req 0xffffff80003b3a80:1379 function 0
mpt0: mpt_wait_req(1) timed out
mpt0: mpt_recover_commands: abort timed-out. Resetting controller
mpt0: mpt_cam_event: 0x0
mpt0: mpt_cam_event: 0x0
mpt0: completing timedout/aborted req 0xffffff80003b3a80:1379
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x16
Does this mean the controller card died or something? I know when I first bought it it did pick up drives on it, and they worked. The drives I have connected to it do not show up in the gui, but I can access them through the shell, which does not help because zpools created in the shell do not carry over to the gui, nor are they carried over after a reboot, mine always say the drives I created the zpool on are corrupted and I have to gpart delete the partition. Help?