Hi,
I have an HPE ML110 Gen10 server running TrueNAS SCALE 22.12.4
I have disks installed:
OS: 2x KINGSTON_SV300S37A60G - ZFS mirror
STORAGE 1: 4x Seagate ST4000NM002A-2HZ101 - raid z1
STORAGE 2: 2x Seagate ST3000VN007-2AH16M - mirror ZFS
All drives have S.M.A.R.T. enabled. and HDD Standby is Always on.
My disk temperatures were always displayed correctly.
I don't know why they stopped displaying correctly.
The current temperature is approximately 68,719,476,771 °C
Something's obviously wrong.
Smartctl shows disk temperatures correctly.
194 Temperature_Celsius -O---K 030 053 000 - 30 (0 16 0 0 0)
The drives are connected directly to the motherboard and the drive controller is set to SATA AHCI.
The only thing that changed was that I connected two SSD drives to perform some tests.
I didn't change anything else in the server.
do you have any ideas?
I have an HPE ML110 Gen10 server running TrueNAS SCALE 22.12.4
I have disks installed:
OS: 2x KINGSTON_SV300S37A60G - ZFS mirror
STORAGE 1: 4x Seagate ST4000NM002A-2HZ101 - raid z1
STORAGE 2: 2x Seagate ST3000VN007-2AH16M - mirror ZFS
All drives have S.M.A.R.T. enabled. and HDD Standby is Always on.
My disk temperatures were always displayed correctly.
I don't know why they stopped displaying correctly.
The current temperature is approximately 68,719,476,771 °C
Something's obviously wrong.
Smartctl shows disk temperatures correctly.
194 Temperature_Celsius -O---K 030 053 000 - 30 (0 16 0 0 0)
The drives are connected directly to the motherboard and the drive controller is set to SATA AHCI.
The only thing that changed was that I connected two SSD drives to perform some tests.
I didn't change anything else in the server.
do you have any ideas?
Attachments
Last edited: