I've been trying at this for a while without getting it to work. I get internet access on the jail only after I run the command 'dhclient epair0b'
Edit:
Ended up deleting everything and making a new jail folder. Selected everything DHCP and its working now.
Code:
root@emby:/ # ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 56:a8:e0:95:53:ab inet 192.168.1.254 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::54a8:e0ff:fe95:53ab%epair0b prefixlen 64 scopeid 0x2 nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>) status: active groups: epair root@emby:/ # ping google.com ping: cannot resolve google.com: Host name lookup failure root@emby:/ # dhclient epair0b DHCPDISCOVER on epair0b to 255.255.255.255 port 67 interval 6 DHCPOFFER from 192.168.1.100 DHCPREQUEST on epair0b to 255.255.255.255 port 67 DHCPACK from 192.168.1.100 bound to 192.168.1.254 -- renewal in 3600 seconds. root@emby:/ # ping google.com PING google.com (x.x.x.x): 56 data bytes 64 bytes from x.x.x.x: icmp_seq=0 ttl=54 time=8.492 ms 64 bytes from x.x.x.x: icmp_seq=1 ttl=54 time=9.131 ms 64 bytes from x.x.x.x: icmp_seq=2 ttl=54 time=9.126 ms 64 bytes from x.x.x.x: icmp_seq=3 ttl=54 time=8.922 ms 64 bytes from x.x.x.x: icmp_seq=4 ttl=54 time=9.235 ms ^C --- google.com ping statistics --- 5 packets transmitted, 5 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 8.492/8.981/9.235/0.265 ms root@emby:/ # ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 56:a8:e0:95:53:ab inet6 fe80::54a8:e0ff:fe95:53ab%epair0b prefixlen 64 scopeid 0x2 inet 192.168.1.254 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>) status: active groups: epair
Edit:
Ended up deleting everything and making a new jail folder. Selected everything DHCP and its working now.
Last edited: