Help. Problems after power failure

[Ismael Duarte]

Hi All!
Once more I need your help.
I had a power failure, after that NAS doesn't boot anymore.
I've formated USB disk, loaded an image with winimage, as I always do and booted again.
From GUI I've loaded a configuration I had, known to be good.
My NAS version is 9.1.1

But, NAS always stop with this screeen:

Can you help me?

 

[cyberjock]

You should be using a UPS so that the system can shutdown cleanly. You can lose data if you don't have an UPS. I just told a guy in PM yesterday that his data is lost permanently, all because of a single improper shutdown. The data is important and it looks like he might have the option for recovery.. if he wants to drop 10k+ on the recovery costs.

As it stands, it looks like your USB stick is trashed. I'd try a reinstall on the same USB stick or another one if you have it.

 

[Ismael Duarte]

you're right about the UPS, sure. I've even bought one but is not working ok.
It doesn't seems to be an USB stick problem, once if I flash a new image with default config I can boot freenas and import volume. Just when upload config I've this error.
Seems that I must configurate my freenas from scratch