I just added a new ssd and added a plex jail to it. Then I restarted my box and it quit working. It seems like it keeps trying to do something, but it can't, and as a "high-key FreeNAS noob", I don't know how to get it working again. I can't access the gui or the shared folders. Any idea what's going on? If it matters, I attached the ssd to one of the ports on my lsi 9211-8i card, with the rest of my drives that are in their own array.
Edit: Also, for some reason the read/write seems to be pretty slow. If I have multiple systems wringing, I can hit around 80MB/s, but from a single computer I can only get a max of 50, while depending on the pc it can max at 10MB/s. It used to have a consistent 100MB/s bandwidth, but then one of the drives had an error once (about 1 week ago), and I'm assuming that was the issue. However, I smart tested it and scrubbed with no errors, so I'm not sure what's going on
Edit: Also, for some reason the read/write seems to be pretty slow. If I have multiple systems wringing, I can hit around 80MB/s, but from a single computer I can only get a max of 50, while depending on the pc it can max at 10MB/s. It used to have a consistent 100MB/s bandwidth, but then one of the drives had an error once (about 1 week ago), and I'm assuming that was the issue. However, I smart tested it and scrubbed with no errors, so I'm not sure what's going on
Last edited by a moderator:
