FreeNAS Kernel Panic iSCSI SAN

VioletDragon

Patron
Joined
Aug 6, 2017
Messages
251
Hi folks,

I've been running FreeNAS 11.3-U5 since 2020 for my iSCSI SAN to 3 Hypervisor Ha infrastructure, i know a lot of people are going to tell me to upgrade to TrueNAS but that true saying, don't fix wasn't is broken well it kind of is. As i say been using this server since 2020 24/7 without issues until now I was met to all VMs on 3 Nodes going into Read-only mode, turns out that after 210 days of uptime it had a kernel panic.

Using a Dell Powervault NX3100,

128GB RAM

Dual Xeons.

Digging around I found the following,

Tracing pid 0 tid 102168 td 0xfffff80259aa9620
kdb_enter() at kdb_enter+0x3b/frame 0xfffffe1f2f7afda0
vpanic() at vpanic+0x19b/frame 0xfffffe1f2f7afe00
panic() at panic+0x43/frame 0xfffffe1f2f7afe60
dblfault_handler() at dblfault_handler+0x1de/frame 0xfffffe1f2f7aff30
Xdblfault() at Xdblfault+0xba/frame 0xfffffe1f2f7aff30
--- trap 0x17, rip = 0xffffffff803b07cc, rsp = 0xfffffe202ae5b000, rbp = 0xfffffe202ae5b020 ---
avl_find() at avl_find+0xc/frame 0xfffffe202ae5b020
vdev_queue_io_to_issue() at vdev_queue_io_to_issue+0x327/frame 0xfffffe202ae5b520
vdev_queue_io_done() at vdev_queue_io_done+0xc8/frame 0xfffffe202ae5b570

Haven't had any issues and this server has been online since 2020 24/7 minus the small shutdowns due to Power Failure.

Regards

Jack
 

VioletDragon

Patron
Joined
Aug 6, 2017
Messages
251
Bump. Any ideas?
 
Top