sparco
Cadet
- Joined
- Apr 7, 2014
- Messages
- 3
Hey,
MB: Asus Rampage II Gene
CPU: I7 920
RAM:18gb
Raid card: Adaptec 6405E(Only for VM machines and ESXi boot)
ESXi 5.5U1
FreeNAS has passthrough to my Intel ICH10 Sata controller. I tried both ACHI and IDE mode none works.
FreeNAS-9.2.1.3-RELEASE-x64 (dc0c46b)
pciconf -lv
none2@pci0:3:0:0: class=0x010601 card=0x82d41043 chip=0x3a228086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) SATA AHCI Controller'
class = mass storage
subclass = SATA
dmesg
ahci0: <Intel ICH10 AHCI SATA controller> port 0x4038-0x403f,0x4030-0x4033,0x4028-0x402f,0x4024-0x4027,0x4000-0x401f mem 0xfd4fe800-0xfd4fefff irq 19 at device 0.0 on pci3
ahci0: AHCI controller reset failure
device_attach: ahci0 attach returned 6
I have tried adding this values to tunables too.
ataahci_load=YES
ahci_load=YES
ataintel_load=YES
MB: Asus Rampage II Gene
CPU: I7 920
RAM:18gb
Raid card: Adaptec 6405E(Only for VM machines and ESXi boot)
ESXi 5.5U1
FreeNAS has passthrough to my Intel ICH10 Sata controller. I tried both ACHI and IDE mode none works.
FreeNAS-9.2.1.3-RELEASE-x64 (dc0c46b)
pciconf -lv
none2@pci0:3:0:0: class=0x010601 card=0x82d41043 chip=0x3a228086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) SATA AHCI Controller'
class = mass storage
subclass = SATA
dmesg
ahci0: <Intel ICH10 AHCI SATA controller> port 0x4038-0x403f,0x4030-0x4033,0x4028-0x402f,0x4024-0x4027,0x4000-0x401f mem 0xfd4fe800-0xfd4fefff irq 19 at device 0.0 on pci3
ahci0: AHCI controller reset failure
device_attach: ahci0 attach returned 6
I have tried adding this values to tunables too.
ataahci_load=YES
ahci_load=YES
ataintel_load=YES