FreeNAS 9.10 Decrypting crashes FreeNAS

[trigate]

Hello,


I just recently bought a full Box with the follwing specs:
i3-4150
32 GB ECC
X10SL7-F
6*4 TB in RaidZ2
FreeNAS-9.10-STABLE-201605240427 (64fcd8e)

What happened:
I installed everything, configured everything (encryption (also tested it) etc.. I could have already used it, but since my UPS didn't arrive until then I just shut the server down and waited for it. So today I did the following things:

Changed the IPMI IP Adress
Changed the FreeNAS IP Adress
Tried to unlock my pool

What happens:
Well I just input my passphrase and it will be "please wait" forever. I can't connect to the Web GUI and it isn't even listed under FreeNAS in my Router instead as a random PC. The direct console that I can see through IPMI seems to be fine somehow.

So I tried the recovery key. The same happens.

Information that I can see: The direct console only shows the device encryption efi thing and last thing at the bottom of the Web GUI to appear is: Can't restart apache24 (is that the reason?)/ This time the last line was" check_create_dir: /var/db/collectd/rrd exists but is not a directory"


Does someone have any idea what I could do now? It would be fine to configure the pool from the scratch, but won't the same happen again?


Edit1: I got it to unlock the pool: Normally every service is restarted. I unchecked everybox. Will now try to find out which service is causing it.


Edit2: It's Jails/Plugins. I have Emby and Plexmediaserver installed (nothing is configured) Just wanted to if it works since they didn't even start in my VM.


Edit3: The Jail had the same IP as the GUI :) Still whats the best way to monitor /var/log/messages ? Can I get something like a live update and how? Can I just open it in putty and i get all new lines till it crashes?

 

[dlavigne]

Build version (from System -> Information)? Also, paste the output of /var/log/messages (use Insert -> Code when pasting).

 

[trigate]

Edited the build version into my the specs (my bad)


Below is everything that I can see after the decryptions starts. After that I can't connect to the server. It may be worth mentioning that I'm using FTP. I guess I should use SSH?

Code:

For the delegated permission list, run: zfs allow|unallow
Jun  8 15:08:33 FreeNAS GEOM_ELI: Device gptid/4cb2d987-2a6b-11e6-b133-0cc47aaa56fe.eli created.
Jun  8 15:08:33 FreeNAS GEOM_ELI: Encryption: AES-XTS 128
Jun  8 15:08:33 FreeNAS GEOM_ELI:     Crypto: hardware
Jun  8 15:08:33 FreeNAS GEOM_ELI: Device gptid/4dd23156-2a6b-11e6-b133-0cc47aaa56fe.eli created.
Jun  8 15:08:33 FreeNAS GEOM_ELI: Encryption: AES-XTS 128
Jun  8 15:08:33 FreeNAS GEOM_ELI:     Crypto: hardware
Jun  8 15:08:33 FreeNAS GEOM_ELI: Device gptid/4e85ba30-2a6b-11e6-b133-0cc47aaa56fe.eli created.
Jun  8 15:08:33 FreeNAS GEOM_ELI: Encryption: AES-XTS 128
Jun  8 15:08:33 FreeNAS GEOM_ELI:     Crypto: hardware
Jun  8 15:08:33 FreeNAS GEOM_ELI: Device gptid/4f9fe936-2a6b-11e6-b133-0cc47aaa56fe.eli created.
Jun  8 15:08:33 FreeNAS GEOM_ELI: Encryption: AES-XTS 128
Jun  8 15:08:33 FreeNAS GEOM_ELI:     Crypto: hardware
Jun  8 15:08:33 FreeNAS GEOM_ELI: Device gptid/50af3bb3-2a6b-11e6-b133-0cc47aaa56fe.eli created.
Jun  8 15:08:33 FreeNAS GEOM_ELI: Encryption: AES-XTS 128
Jun  8 15:08:33 FreeNAS GEOM_ELI:     Crypto: hardware
Jun  8 15:08:33 FreeNAS GEOM_ELI: Device gptid/517fd29a-2a6b-11e6-b133-0cc47aaa56fe.eli created.
Jun  8 15:08:33 FreeNAS GEOM_ELI: Encryption: AES-XTS 128
Jun  8 15:08:33 FreeNAS GEOM_ELI:     Crypto: hardware
Jun  8 13:08:34 FreeNAS devd: Executing 'logger -p kern.notice -t ZFS 'vdev state changed, pool_guid=7730588963106030012 vdev_guid=4831179510792646484''
Jun  8 15:08:34 FreeNAS ZFS: vdev state changed, pool_guid=7730588963106030012 vdev_guid=4831179510792646484
Jun  8 13:08:34 FreeNAS devd: Executing 'logger -p kern.notice -t ZFS 'vdev state changed, pool_guid=7730588963106030012 vdev_guid=10859334874581405059''
Jun  8 15:08:34 FreeNAS ZFS: vdev state changed, pool_guid=7730588963106030012 vdev_guid=10859334874581405059
Jun  8 13:08:34 FreeNAS devd: Executing 'logger -p kern.notice -t ZFS 'vdev state changed, pool_guid=7730588963106030012 vdev_guid=3765611153936239523''
Jun  8 15:08:34 FreeNAS ZFS: vdev state changed, pool_guid=7730588963106030012 vdev_guid=3765611153936239523
Jun  8 13:08:34 FreeNAS devd: Executing 'logger -p kern.notice -t ZFS 'vdev state changed, pool_guid=7730588963106030012 vdev_guid=13926667009248508587''
Jun  8 15:08:34 FreeNAS ZFS: vdev state changed, pool_guid=7730588963106030012 vdev_guid=13926667009248508587
Jun  8 13:08:34 FreeNAS devd: Executing 'logger -p kern.notice -t ZFS 'vdev state changed, pool_guid=7730588963106030012 vdev_guid=13808515790246468218''
Jun  8 15:08:34 FreeNAS ZFS: vdev state changed, pool_guid=7730588963106030012 vdev_guid=13808515790246468218
Jun  8 13:08:34 FreeNAS devd: Executing 'logger -p kern.notice -t ZFS 'vdev state changed, pool_guid=7730588963106030012 vdev_guid=2909847170702000701''
Jun  8 15:08:34 FreeNAS ZFS: vdev state changed, pool_guid=7730588963106030012 vdev_guid=2909847170702000701
Jun  8 15:08:40 FreeNAS notifier: No matching processes were found
Jun  8 15:08:40 FreeNAS notifier: No matching processes were found
Jun  8 15:08:40 FreeNAS notifier: No matching processes were found
Jun  8 15:08:40 FreeNAS notifier: Cannot 'start' ix-afpd. Set netatalk_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'.
Jun  8 15:08:40 FreeNAS notifier: Cannot 'start' netatalk. Set netatalk_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'.
Jun  8 15:08:41 FreeNAS generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: /usr/local/bin/net -d 0 getlocalsid
Jun  8 15:08:41 FreeNAS generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: /usr/local/bin/net -d 0 setlocalsid S-1-5-21-2841031720-1888969899-3590341132
Jun  8 15:08:41 FreeNAS generate_smb4_conf.py: [generate_smb4_conf:135] Failed to setlocalsid with the following error: Can't load /usr/local/etc/smb4.conf - run testparm to debug it
Jun  8 15:08:41 FreeNAS notifier: Unable to set SID to S-1-5-21-2841031720-1888969899-3590341132
Jun  8 15:08:41 FreeNAS generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: /sbin/sysctl -n 'kern.maxfilesperproc'
Jun  8 15:08:41 FreeNAS generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Jun  8 15:08:41 FreeNAS generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: /usr/local/bin/net -d 0 getlocalsid
Jun  8 15:08:41 FreeNAS notifier: winbindd not running? (check /var/run/samba/winbindd.pid).
Jun  8 15:08:41 FreeNAS notifier: smbd not running? (check /var/run/samba/smbd.pid).
Jun  8 15:08:41 FreeNAS notifier: nmbd not running? (check /var/run/samba/nmbd.pid).
Jun  8 15:08:41 FreeNAS notifier: Stopping mdnsd.
Jun  8 15:08:41 FreeNAS mDNSResponder: mDNSResponder (Engineering Build) (May 24 2016 04:50:46) stopping
Jun  8 15:08:41 FreeNAS mDNSResponder: mDNS_FinalExit failed to send goodbye for: 0000000801462580 01   26 _http._tcp.local. PTR FreeNAS._http._tcp.local.
Jun  8 15:08:41 FreeNAS notifier: Waiting for PIDS: 2743.
Jun  8 15:08:41 FreeNAS notifier: Starting mdnsd.
Jun  8 15:08:41 FreeNAS mDNSResponder: mDNSResponder (Engineering Build) (May 24 2016 04:50:46) starting
Jun  8 15:08:41 FreeNAS mDNSResponder:  10: Listening for incoming Unix Domain Socket client requests
Jun  8 15:08:41 FreeNAS mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Jun  8 15:08:41 FreeNAS mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Jun  8 15:08:43 FreeNAS mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 FreeNAS.local. (Addr) that's already in the list
Jun  8 15:08:43 FreeNAS mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 20.0.168.192.in-addr.arpa. (PTR) that's already in the list
Jun  8 15:08:45 FreeNAS notifier: Stopping proftpd.
Jun  8 15:08:46 FreeNAS proftpd[3945]: 127.0.0.1 - ProFTPD killed (signal 15)
Jun  8 15:08:46 FreeNAS proftpd[3945]: 127.0.0.1 - ProFTPD 1.3.5a standalone mode SHUTDOWN
Jun  8 15:08:46 FreeNAS notifier: Waiting for PIDS: 3945 4033.
Jun  8 15:08:46 FreeNAS notifier: Starting proftpd.
Jun  8 15:08:46 FreeNAS proftpd[4620]: 127.0.0.1 - ProFTPD 1.3.5a (maint) (built Tue May 24 2016 04:59:18 UTC) standalone mode STARTUP
Jun  8 15:08:47 FreeNAS notifier: ctld not running? (check /var/run/ctld.pid).
Jun  8 15:08:47 FreeNAS notifier: Cannot 'restart' ctld. Set ctld_enable to YES in /etc/rc.conf or use 'onerestart' instead of 'restart'.
Jun  8 15:08:50 FreeNAS proftpd[4703]: 127.0.0.1 (192.168.0.13[192.168.0.13]) - ROOT FTP login successful
Jun  8 15:08:52 FreeNAS notifier: lockd not running?
Jun  8 15:08:52 FreeNAS notifier: statd not running?
Jun  8 15:08:52 FreeNAS notifier: nfsd not running? (check /var/run/nfsd.pid).
Jun  8 15:08:52 FreeNAS notifier: mountd not running? (check /var/run/mountd.pid).
Jun  8 15:08:52 FreeNAS notifier: nfsuserd not running?
Jun  8 15:08:52 FreeNAS notifier: gssd not running? (check /var/run/gssd.pid).
Jun  8 15:08:52 FreeNAS notifier: rpcbind not running? (check /var/run/rpcbind.pid).
Jun  8 15:08:52 FreeNAS notifier: apache24 not running? (check /var/run/httpd.pid).
Jun  8 15:08:52 FreeNAS notifier: Cannot 'restart' apache24. Set apache24_enable to YES in /etc/rc.conf or use 'onerestart' instead of 'restart'.

 

[dlavigne]

Can I get something like a live update and how? Can I just open it in putty and i get all new lines till it crashes?

System -> Advanced -> Show console messages in the footer if you're viewing the GUI. Otherwise, run tail -f /var/log/messages in CLI session.