kgmoney
Cadet
- Joined
- May 4, 2016
- Messages
- 8
Hi,
I'm trying to setup a VM per https://doc.freenas.org/11/vms.html. I'm running on an AMD and the output of is
Here is the full CPU info:
The only thing I see in /var/log/messages when I try to start the vm is the following:
I create the VM in the web interface and everthing looks good, however when I try to start it, the status remains 'STOPPED'. Are there logs somewhere that I could use for troubleshooting? Anyone else have issues with AMD? ...I've seen it work on an Intel board.
Thanks,
Kevin
I'm trying to setup a VM per https://doc.freenas.org/11/vms.html. I'm running on an AMD and the output of
Code:
grep POPCNT /var/run/dmesg.boot
Code:
Features2=0x802009<SSE3,MON,CX16,POPCNT>
Here is the full CPU info:
Code:
CPU: AMD Phenom(tm) II X6 1090T Processor (3192.06-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x100fa0 Family=0x10 Model=0xa Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> SVM: NP,NRIP,NAsids=64 TSC: P-state invariant, performance statistics
The only thing I see in /var/log/messages when I try to start the vm is the following:
Code:
Jun 30 14:19:40 freenas tap3: Ethernet address: 00:bd:4a:eb:88:03 Jun 30 14:19:40 freenas kernel: tap3: promiscuous mode enabled
I create the VM in the web interface and everthing looks good, however when I try to start it, the status remains 'STOPPED'. Are there logs somewhere that I could use for troubleshooting? Anyone else have issues with AMD? ...I've seen it work on an Intel board.
Thanks,
Kevin
Last edited: