FN11.2 BETA3 iocage jail vnet networking not working

[AVSION]

Hi guys,

i did a fresh install of Freenas 11.2 BETA3 but cant get the iocage jail vnet0 networking to work, see the following information below. freenas has networking working no problem ie. default gateway, 192.168.1.1, dns 8.8.8.8 and 8.8.4.4 can ping also www.google.com. i also tried a test jail using the FN NIC vmx0 instead of vnet0 and its working properly can get networking.

i prefer to use vnet0 if possible to get the full stack for unifi controller and plex.

please help i'm stuck!!!

let me know if you need more information

Thank you


what i done:


iocage create -r 11.2-RELEASE -n Unifi ip4_addr="vnet0|192.168.1.5/24" defaultrouter=192.168.1.1 vnet=on boot=on allow_raw_sockets=1


System > Tunables

Variable: cloned_interfaces, Value: bridge0, Type: rc.conf
Variable: ifconfig_bridge0, Value: addm vnet0 up, Type: rc.conf

rc.conf added rename ifconfig_epair0_name="epair0b"

Code:

host_hostname="Unifi"
cron_flags="$cron_flags -J 15"

# Disable Sendmail by default
sendmail_enable="NONE"
sendmail_submit_enable="NO"
sendmail_outbound_enable="NO"
sendmail_msp_queue_enable="NO"

# Run secure syslog
syslogd_flags="-c -ss"

# Enable IPv6
ipv6_activate_all_interfaces="YES"
ifconfig_epair0_name="epair0b"

Jail ifconfig

Code:

root@Unifi:~ # ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
		options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
		inet6 ::1 prefixlen 128
		inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
		inet 127.0.0.1 netmask 0xff000000
		nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
		groups: lo
epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
		options=8<VLAN_MTU>
		ether 02:ff:60:5a:44:c5
		hwaddr 02:70:d0:00:06:0b
		inet 192.168.1.5 netmask 0xffffff00 broadcast 192.168.1.255
		nd6 options=1<PERFORMNUD>
		media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
		status: active
		groups: epair

Freenas

Code:

[root@freenas ~]# ifconfig
vmx0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
		options=200099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,RXCSUM_IPV6>
		ether 00:0c:29:ab:00:cc
		hwaddr 00:0c:29:ab:00:cc
		inet 192.168.1.6 netmask 0xffffff00 broadcast 192.168.1.255
		nd6 options=9<PERFORMNUD,IFDISABLED>
		media: Ethernet autoselect
		status: active
vmx1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
		options=60039b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,TSO6,RXCSUM_IPV6,TXCSUM_IPV6>
		ether 00:0c:29:ab:00:d6
		hwaddr 00:0c:29:ab:00:d6
		inet 10.55.1.2 netmask 0xffff0000 broadcast 10.55.255.255
		nd6 options=9<PERFORMNUD,IFDISABLED>
		media: Ethernet autoselect
		status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
		options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
		inet6 ::1 prefixlen 128
		inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
		inet 127.0.0.1 netmask 0xff000000
		nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
		groups: lo
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
		ether 02:37:cb:83:75:00
		nd6 options=1<PERFORMNUD>
		groups: bridge
		id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
		maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
		root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
		member: vnet0:9 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
				ifmaxaddr 0 port 5 priority 128 path cost 2000
		member: vmx0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
				ifmaxaddr 0 port 1 priority 128 path cost 2000
vnet0:9: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
		description: associated with jail: Unifi
		options=8<VLAN_MTU>
		ether 02:ff:60:5a:44:c4
		hwaddr 02:70:d0:00:05:0a
		nd6 options=1<PERFORMNUD>
		media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
		status: active
		groups: epair

Code:

[root@freenas ~]# iocage get all Unifi
CONFIG_VERSION:11
allow_chflags:0
allow_mount:0
allow_mount_devfs:0
allow_mount_nullfs:0
allow_mount_procfs:0
allow_mount_tmpfs:0
allow_mount_zfs:0
allow_quotas:0
allow_raw_sockets:1
allow_set_hostname:1
allow_socket_af:0
allow_sysvipc:0
available:readonly
basejail:no
boot:on
bpf:yes
children_max:0
cloned_release:11.2-RELEASE
comment:none
compression:lz4
compressratio:readonly
coredumpsize:off
count:1
cpuset:off
cputime:off
datasize:off
dedup:off
defaultrouter:192.168.1.1
defaultrouter6:none
depends:none
devfs_ruleset:4
dhcp:off
enforce_statfs:2
exec_clean:1
exec_fib:0
exec_jail_user:root
exec_poststart:/usr/bin/true
exec_poststop:/usr/bin/true
exec_prestart:/usr/bin/true
exec_prestop:/usr/bin/true
exec_start:/bin/sh /etc/rc
exec_stop:/bin/sh /etc/rc.shutdown
exec_system_jail_user:0
exec_system_user:root
exec_timeout:60
host_domainname:none
host_hostname:Unifi
host_hostuuid:Unifi
host_time:yes
hostid:b7e71a60-b7da-11e8-8865-000c29ab00cc
hostid_strict_check:off
interfaces:vnet0:bridge0
ip4:new
ip4_addr:vnet0|192.168.1.5/24
ip4_saddrsel:1
ip6:new
ip6_addr:none
ip6_saddrsel:1
jail_zfs:off
jail_zfs_dataset:iocage/jails/Unifi/data
jail_zfs_mountpoint:none
last_started:2018-09-17 00:20:36
login_flags:-f root
mac_prefix:02ff60
maxproc:off
memorylocked:off
memoryuse:off
mount_devfs:1
mount_fdescfs:1
mount_linprocfs:0
mount_procfs:0
mountpoint:readonly
msgqqueued:off
msgqsize:off
nmsgq:off
notes:none
nsemop:off
nshm:off
nthr:off
openfiles:off
origin:readonly
owner:root
pcpu:off
priority:99
pseudoterminals:off
quota:none
release:11.2-RELEASE-p3
reservation:none
resolver:/etc/resolv.conf
rlimits:off
securelevel:2
shmsize:off
stacksize:off
state:down
stop_timeout:30
swapuse:off
sync_state:none
sync_target:none
sync_tgt_zpool:none
sysvmsg:new
sysvsem:new
sysvshm:new
template:no
type:jail
used:readonly
vmemoryuse:off
vnet:on
vnet0_mac:02ff605a44c4,02ff605a44c5
vnet1_mac:none
vnet2_mac:none
vnet3_mac:none
vnet_interfaces:none
wallclock:off

 

[SavageAUS]

I believe you should not need the tunables in beta 3. Disable them and reboot. Try again.


Sent from my iPhone using Tapatalk