FN11.0-U3 have changed the MAC of my LAGG iface

[Jacopx]

Buongiorno,
i've just updated and my system has started with a different MAC causing big trouble... All my jail have the same mac, but not the main system. It have picked the last address that i have write on it (9 months ago)...

EDIT: I have 3 ETH port, 2 built-in the MOBO and 1 more from TP-LINK. The system have always used one MAC from the 2 builted-in, now it use the TP-LINK one...

 

[dlavigne]

Please post the output of ifconfig within code tags.

 

[Jacopx]

Please post the output of ifconfig within code tags.

Here you are:

Code:

re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=82098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 10:fe:ed:02:41:fd
	nd6 options=9<PERFORMNUD,IFDISABLED>
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=2098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
	ether 10:fe:ed:02:41:fd
	nd6 options=9<PERFORMNUD,IFDISABLED>
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
em1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=2098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
	ether 10:fe:ed:02:41:fd
	nd6 options=9<PERFORMNUD,IFDISABLED>
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
	inet 127.0.0.1 netmask 0xff000000
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: lo
lagg0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=2098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
	ether 10:fe:ed:02:41:fd
	inet 172.16.0.10 netmask 0xffffffc0 broadcast 172.16.0.63
	nd6 options=9<PERFORMNUD,IFDISABLED>
	media: Ethernet autoselect
	status: active
	groups: lagg
	laggproto lacp lagghash l2,l3,l4
	laggport: re0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
	laggport: em0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
	laggport: em1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	ether 02:75:34:4a:53:00
	nd6 options=1<PERFORMNUD>
	groups: bridge
	id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
	maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
	member: epair3a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
			ifmaxaddr 0 port 10 priority 128 path cost 2000
	member: epair2a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
			ifmaxaddr 0 port 9 priority 128 path cost 2000
	member: epair1a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
			ifmaxaddr 0 port 8 priority 128 path cost 2000
	member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
			ifmaxaddr 0 port 7 priority 128 path cost 2000
	member: lagg0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
			ifmaxaddr 0 port 5 priority 128 path cost 6666

 

[dlavigne]

Were you able to resolve this? If not, why is the changed MAC address problematic?

 

[Jacopx]

Were you able to resolve this? If not, why is the changed MAC address problematic?

No, i don't know how to solve the problem related to the MAC change. The correlated problematic are linked to the DHCP reservation problem because when i did the update i was far from home (yes, i'm stupid) and when i have tried to reach my server it was unreachable. Then i have realized that was only on a different IP but it was to late for what i needed to do! ;)