So I got 2 cards from View: http://www.ebay.com/itm/121431653923
and I am trying to figure out:
a)Which LSI card does this map to? I am thinking 9211-8i or 9210-3i
b)Where do I download the stinking phase 16 firmware for this thing at?
I have been searching the forums, google and dell for the better part of the day. Thanks
Here is output I see on freenas:
and I am trying to figure out:
a)Which LSI card does this map to? I am thinking 9211-8i or 9210-3i
b)Where do I download the stinking phase 16 firmware for this thing at?
I have been searching the forums, google and dell for the better part of the day. Thanks
Here is output I see on freenas:
Code:
[root@new_nas] ~# dmesg|grep -i mps mps0: <LSI SAS2008> port 0x3000-0x30ff mem 0xd8440000-0xd844ffff,0xd8400000-0xd843ffff irq 16 at device 0.0 on pci8 mps0: Firmware: 07.15.08.00, Driver: 16.00.00.00-fbsd mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> mps1: <LSI SAS2008> port 0x4000-0x40ff mem 0xd8740000-0xd874ffff,0xd8700000-0xd873ffff irq 18 at device 0.0 on pci9 mps1: Firmware: 07.15.08.00, Driver: 16.00.00.00-fbsd mps1: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> da0 at mps1 bus 0 scbus1 target 12 lun 0
Code:
[root@new_nas] ~# sas2flash -listall LSI Corporation SAS2 Flash Utility Version 14.00.00.00 (2012.07.04) Copyright (c) 2008-2012 LSI Corporation. All rights reserved Adapter Selected is a LSI SAS: SAS2008(B2) Num Ctlr FW Ver NVDATA x86-BIOS PCI Addr ---------------------------------------------------------------------------- 0 SAS2008(B2) 07.15.08.00 07.00.00.19 07.11.10.00 00:08:00:00 1 SAS2008(B2) 07.15.08.00 07.00.00.19 07.11.10.00 00:09:00:00 Finished Processing Commands Successfully. Exiting SAS2Flash.