I drive a FreeNas installed in an ESXi 6.5 system.
I have handed through a SATA Controller (PCI) via PassThrough to the FreeNas VM.
There are 4 drives connected to the SATA Controller (SATA).
I have installed the FreeNAS operation system on a virtual harddrive with a size of 16 GB ("da0"). This virtual drive is physically on a SSD installed at the host and connected via SATA directly to the mainboard.
FreeNas seems to work like a charm so far but i see periodically error messages at the console:
(da0:mpt0:0:0:0): UNMAP, CDB: 42 00 00 00 00 00 00 00 18 00
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: Vendor Specific asc:0,0 (No additional sense information)
(da0:mpt0:0:0:0): Error 5, Unretryable error
(da0:mpt0:0:0:0): UNMAP, CDB: 42 00 00 00 00 00 00 00 88 00
(da0:mpt0:0:0:0): CAM Status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: Vendor Specific as: 0,0 (No additional sense information)
(da0:mpt0:0:0:0): Error 5, Unretryable error
(da0:mpt0:0:0:0): UNMAP, CDB: 42 00 00 00 00 00 00 00 68 00
(da0:mpt0:0:0:0): CAM Status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: Vendor Specific as: 0,0 (No additional sense information)
(da0:mpt0:0:0:0): Error 5, Unretryable error
(da0:mpt0:0:0:0): UNMAP, CDB: 42 00 00 00 00 00 00 00 48 00
(da0:mpt0:0:0:0): CAM Status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: Vendor Specific as: 0,0 (No additional sense information)
(da0:mpt0:0:0:0): Error 5, Unretryable error
There are days where this messages show up only once, and some days the show up every 5 minutes or so.
Does anybody have an idea what i should check or what might be misconfigured?
Regards
Boxson
I have handed through a SATA Controller (PCI) via PassThrough to the FreeNas VM.
There are 4 drives connected to the SATA Controller (SATA).
I have installed the FreeNAS operation system on a virtual harddrive with a size of 16 GB ("da0"). This virtual drive is physically on a SSD installed at the host and connected via SATA directly to the mainboard.
FreeNas seems to work like a charm so far but i see periodically error messages at the console:
(da0:mpt0:0:0:0): UNMAP, CDB: 42 00 00 00 00 00 00 00 18 00
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: Vendor Specific asc:0,0 (No additional sense information)
(da0:mpt0:0:0:0): Error 5, Unretryable error
(da0:mpt0:0:0:0): UNMAP, CDB: 42 00 00 00 00 00 00 00 88 00
(da0:mpt0:0:0:0): CAM Status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: Vendor Specific as: 0,0 (No additional sense information)
(da0:mpt0:0:0:0): Error 5, Unretryable error
(da0:mpt0:0:0:0): UNMAP, CDB: 42 00 00 00 00 00 00 00 68 00
(da0:mpt0:0:0:0): CAM Status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: Vendor Specific as: 0,0 (No additional sense information)
(da0:mpt0:0:0:0): Error 5, Unretryable error
(da0:mpt0:0:0:0): UNMAP, CDB: 42 00 00 00 00 00 00 00 48 00
(da0:mpt0:0:0:0): CAM Status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: Vendor Specific as: 0,0 (No additional sense information)
(da0:mpt0:0:0:0): Error 5, Unretryable error
There are days where this messages show up only once, and some days the show up every 5 minutes or so.
Does anybody have an idea what i should check or what might be misconfigured?
Regards
Boxson