Hi Guys/ Girls
I need some help with my FreeNAS system.
So this is the scenario:
NAS 1
FreeNAS-9.10.2-U6 (561f0d7a1)
i5 2500k
24Gb DDR3 Ram (8x8 + 4x4)
Motherboard : Gigabyte GA-Z68A-D3H-B3 (rev. 1.3)
Chipset : Intel® Z68 Express Chipset
NIC : Onboard Realtek RTL8111E chip (10/100/1000 Mbit)
HDD : 2 x HSGT Deskstar 8TB NAS ( mirror )
NAS 2
Netgear Readynas 212
Memory : 2GB RAM
JBOD 2 x 2TB WD RED NAS
PC
Windows 10 Pro
i7 4770k
16gb DDR3 (4x4)
Motherboard : Gigabyte Z97X-UD3H-BK-CF
Chipset : Intel® Z97 Express Chipset
NIC : Onboard Intel® GbE LAN chip (10/100/1000 Mbit)
Video Card : Nvidia GTX 1060 6GB
SSD 1TB WD BLue
Running Malwarebytes
Network
Router : Archer 2300
Switch : 3 x D-Link DGS-105 5 Port Gigabit Switch
Ethernet cable : Cat5e
Router ----- Switch ---------Switch ------Readynas 212 / Freenas 9.1 / Desktop i7 4770k
______________ \Switch
All in the same network 192.168.1.x
The Problem :
I can copy to any NAS from my PC
I can copy from any NAS to my PC
I can’t copy big files (70gb) from FreeNAS to ReadyNAS using my PC gives error Error 0x8007003B, but I can copy from ReadyNAS to FreeNAS using the PC without a problem .
When I get Error 0x8007003B I can’t access FreeNAS anymore y have to manually shutdown it and restart. No ping.
I use SMB and I have both NAS shared folders mapped as network drives.
The only 2 services enabled in FreeNAS are S.M.A.R.T and SMB
Transfer speeds are 80MB/s – 97MB/s
Router antivirus disabled / Readynas antivirus disabled
That is the only issue.
Any clue?
Thanks in advance
Jose
I need some help with my FreeNAS system.
So this is the scenario:
NAS 1
FreeNAS-9.10.2-U6 (561f0d7a1)
i5 2500k
24Gb DDR3 Ram (8x8 + 4x4)
Motherboard : Gigabyte GA-Z68A-D3H-B3 (rev. 1.3)
Chipset : Intel® Z68 Express Chipset
NIC : Onboard Realtek RTL8111E chip (10/100/1000 Mbit)
HDD : 2 x HSGT Deskstar 8TB NAS ( mirror )
NAS 2
Netgear Readynas 212
Memory : 2GB RAM
JBOD 2 x 2TB WD RED NAS
PC
Windows 10 Pro
i7 4770k
16gb DDR3 (4x4)
Motherboard : Gigabyte Z97X-UD3H-BK-CF
Chipset : Intel® Z97 Express Chipset
NIC : Onboard Intel® GbE LAN chip (10/100/1000 Mbit)
Video Card : Nvidia GTX 1060 6GB
SSD 1TB WD BLue
Running Malwarebytes
Network
Router : Archer 2300
Switch : 3 x D-Link DGS-105 5 Port Gigabit Switch
Ethernet cable : Cat5e
Router ----- Switch ---------Switch ------Readynas 212 / Freenas 9.1 / Desktop i7 4770k
______________ \Switch
All in the same network 192.168.1.x
The Problem :
I can copy to any NAS from my PC
I can copy from any NAS to my PC
I can’t copy big files (70gb) from FreeNAS to ReadyNAS using my PC gives error Error 0x8007003B, but I can copy from ReadyNAS to FreeNAS using the PC without a problem .
When I get Error 0x8007003B I can’t access FreeNAS anymore y have to manually shutdown it and restart. No ping.
I use SMB and I have both NAS shared folders mapped as network drives.
The only 2 services enabled in FreeNAS are S.M.A.R.T and SMB
Transfer speeds are 80MB/s – 97MB/s
Router antivirus disabled / Readynas antivirus disabled
That is the only issue.
Any clue?
Thanks in advance
Jose
Last edited: