Degraded Pool - Log file issues after drive change

[SneekyMellon]

Hi Everyone,

I recently built a TrueNas system and got a bad drive after about a month or two of perfect operation. No worries, bought a new one and slapped her in. The pool did its thing and all the data is where it should be (as far as I can tell).

The issue is now Two of my drives are showing as degraded as there are six bad files that I assume are log files judging by the file path.

Code:

root@Kuiper[~]# zpool status -v
  pool: Main
 state: DEGRADED
status: One or more devices has experienced an error resulting in data
        corruption.  Applications may be affected.
action: Restore the file in question if possible.  Otherwise restore the
        entire pool from backup.
   see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
  scan: scrub repaired 0B in 08:04:55 with 7 errors on Sun Nov  6 08:04:55 2022
config:

        NAME                                            STATE     READ WRITE CKSUM
        Main                                            DEGRADED     0     0 0
          raidz1-0                                      DEGRADED     0     0 0
            gptid/99ad3e1b-f687-11ec-9863-94de806c01b7  ONLINE       0     0 0
            gptid/99bda67a-f687-11ec-9863-94de806c01b7  DEGRADED     0     0 0  too many errors
            gptid/9aa57963-f687-11ec-9863-94de806c01b7  DEGRADED     0     0 0  too many errors
            gptid/c87c9618-2f40-11ed-8f14-94de806c01b7  ONLINE       0     0 0

errors: Permanent errors have been detected in the following files:

        /var/db/system/syslog-481d11dc8be44177a340c08096234a34/log/messages
        /var/db/system/syslog-481d11dc8be44177a340c08096234a34/log/console.log
        /var/db/system/syslog-481d11dc8be44177a340c08096234a34/log/daemon.log
        /var/db/system/syslog-481d11dc8be44177a340c08096234a34/log/middlewared.log
        /var/db/system/syslog-481d11dc8be44177a340c08096234a34/log/samba4/log.smbd
        /var/db/system/syslog-481d11dc8be44177a340c08096234a34/log/samba4/log.nmbd

  pool: boot-pool
 state: ONLINE
status: Some supported and requested features are not enabled on the pool.
        The pool can still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
        the pool may no longer be accessible by software that does not support
        the features. See zpool-features(7) for details.
  scan: scrub repaired 0B in 00:00:05 with 0 errors on Wed Nov  2 03:45:05 2022
config:

My question is: how do I get this pool health again. as far as I can tell its working normally despite this and has been for about a month or so. What are these files? can I just delete them?

Any help much appreciated.

 

[Arwen]

Please list your entire hardware configuration, especially related to storage, like vendor & model of your storage devices. Plus how they are wired to the system board.