lumbric
Dabbler
- Joined
- Dec 26, 2012
- Messages
- 10
I use FreeNAS since 10 months on two different servers. Both are HP ProLiant MicroServer N40L and I used a Corsair Flash Voyager Slider USB 3. The first problem occured after several months. Strange things were going on. I saw somewhere I/O Error so I decided to reflash the the Freenas image and start from scratch (using backups of the config) with a new USB flash drive of the same type.
One hardware error might be bad luck. But now I discovered that the same problem seemd to have occured at both severs again. So in total there are 3 different USB flash drives with corrupt data in 10 months.
One of the two servers simply crashed and it doesn't boot anymore. The other one seems to be fine, but django crashed very similar to the problem discribed here:
http://forums.freenas.org/threads/login-eror-8-2-beta.6621/
I checked the file, but I could find anything wrong in it. It complained about a character \xf4.
I am using FreeNAS-8.3.0-RELEASE-p1-x64.
One hardware error might be bad luck. But now I discovered that the same problem seemd to have occured at both severs again. So in total there are 3 different USB flash drives with corrupt data in 10 months.
One of the two servers simply crashed and it doesn't boot anymore. The other one seems to be fine, but django crashed very similar to the problem discribed here:
http://forums.freenas.org/threads/login-eror-8-2-beta.6621/
I checked the file, but I could find anything wrong in it. It complained about a character \xf4.
I am using FreeNAS-8.3.0-RELEASE-p1-x64.