Crucial CT3KIT51272BA1067 12GB

[khani47]

Hello,

I have purchased the above memory very cheap £22.00 off amazon - but i want to make sure the memory would be compatible with the Supermicro MBD-X10SL7-FO.

thanks

 

[Fuganater]

Check Supermicro's compatability list on their website.

 

[khani47]

it doesn't list it :
this is from supermcro's website :
System Memory

Memory Capacity

• 4x 240-pin DDR3 DIMM sockets
• Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)

Memory Type

• 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 8GB, 4GB, 2GB, 1GB

Memory Voltage

• 1.5V, 1.35V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)

this is from Crucials website:

rand

Crucial
Form Factor

UDIMM
Capacity

12GB kit (4GBx3)
Warranty

Limited Lifetime
Specs

DDR3 PC3-8500 • CL=7 • Unbuffered • ECC • DDR3-1066 • 1.5V • 512Meg x 72 •
Series

Crucial
ECC

ECC
Kit Qty

3
Speed

1066 MT/S
Tracer

False
Voltage

1.5V
DIMM Type

Unbuffered
Bullet Features

Increases system performance

 

[danb35]

The specs look like it should work, but we don't generally recommend using 4 GB DIMMs--since you only have 4 DIMM slots, they don't give you much headroom. You may have gotten a good enough price to make it worthwhile, but that would be an unusual case.

 

[Fuganater]

Per Crucial's website, on this 12GB kit is compatable.

 

[khani47]

well the
CT3KIT51272BA1067 has been delivered, so Amazon stayed true to their price which is now £100+.

im concerned the speed will not be high enough for this board, as the one delivered has 1066 MT/S as opposed to the 1600?

 

[Ericloewe]

DDR3 (and DDR2 and DDR4) will be automagically run at the highest supported speed - the lowest of motherboard, CPU and DIMM speeds.