bmcclure937
Contributor
- Joined
- Jul 13, 2012
- Messages
- 110
I received an email alert yesterday that my boot volume state is degraded:
I also received this security output showing the device having errors and then being disconnected:
I am running mirrored boot device (2x SanDisk 16GB USB 2.0 flash drives). I am looking at the documentation on how to replace a failed drive but wanted to check with the community for some clarification.
1. Is there any way I can repair the drive or does it need to be replaced?
2. How on earth can I figure out which USB drive is which?
Thanks all. If the USB drive is failed then I am going to ask for a replacement from SanDisk.
freenas.local: Critical Alerts
The boot volume state is DEGRADED: One or more devices are faulted in response to persistent errors. Sufficient replicas exist for the pool to continue functioning in a degraded state.
I also received this security output showing the device having errors and then being disconnected:
freenas.local kernel log messages:
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 50 30 af 00 00 2c 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 18 f4 08 00 00 01 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 18 f4 08 00 00 01 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 18 f4 08 00 00 01 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 18 f4 08 00 00 01 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 18 f4 08 00 00 01 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Error 5, Retries exhausted
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 29 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 29 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 29 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 29 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 29 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Error 5, Retries exhausted
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 32 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 32 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 32 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 32 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 1a 32 38 00 00 80 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Error 5, Retries exhausted
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 06 38 00 00 10 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 06 38 00 00 10 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 06 38 00 00 10 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 06 38 00 00 10 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Retrying command
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 06 38 00 00 10 00
> (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
> (da0:umass-sim0:0:0:0): Error 5, Retries exhausted
> (da0:umass-sim0:0:0:0): got CAM status 0x44
> (da0:umass-sim0:0:0:0): fatal error, failed to attach to device
> da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
> da0: <SanDisk Cruzer Fit 1.00> s/n 4C530001121214120334 detached
> (da0:umass-sim0:0:0:0): Periph destroyed
I am running mirrored boot device (2x SanDisk 16GB USB 2.0 flash drives). I am looking at the documentation on how to replace a failed drive but wanted to check with the community for some clarification.
1. Is there any way I can repair the drive or does it need to be replaced?
2. How on earth can I figure out which USB drive is which?
Thanks all. If the USB drive is failed then I am going to ask for a replacement from SanDisk.