I need two rack mount storage servers. One will hold archive files and the other backup files. Speed is not the issue. Would like something that is cost effective to purchase and has moderate energy costs. Prefer SuperMicro or Dell. New or used. I read the Hardware Guide but can't quite get to the point of selecting specific optimum hardware for this application.
From some long ago retired HP Blade Servers, BL490c G7, I have a number of each of the the following parts that could be used if not too out of date:
- 8GB sticks Samsung 2Rx4 PC3l - 10600R - 09 - 10 - E1 - P1 DDR3 Registered RAM
- Intel Xeon 6 core 2.66GHz/1333/12M, HP # 594884-001 (X5650 and I think they use SOCKET-LGA(1366))
Would like for the servers to hold about 8 or 12, 3.5" drives each. Will likely run RAIDZ2. Will probably start with 4TB WD Red drives.
Any suggestions on accomplishing this cost and energy efficiently? Thanks in advance.
From some long ago retired HP Blade Servers, BL490c G7, I have a number of each of the the following parts that could be used if not too out of date:
- 8GB sticks Samsung 2Rx4 PC3l - 10600R - 09 - 10 - E1 - P1 DDR3 Registered RAM
- Intel Xeon 6 core 2.66GHz/1333/12M, HP # 594884-001 (X5650 and I think they use SOCKET-LGA(1366))
Would like for the servers to hold about 8 or 12, 3.5" drives each. Will likely run RAIDZ2. Will probably start with 4TB WD Red drives.
Any suggestions on accomplishing this cost and energy efficiently? Thanks in advance.