Checksum error (no memtest or smart error, new sata cable)

[huberte]

Hi, having speed issues on my pool.

I did a scrub, and still have CKSUM errors :

Code:

[root@freenas] ~# zpool status -v
  pool: gra1
 state: ONLINE
status: One or more devices has experienced an unrecoverable error.  An
        attempt was made to correct the error.  Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
        using 'zpool clear' or replace the device with 'zpool replace'.
   see: http://www.sun.com/msg/ZFS-8000-9P
  scan: scrub repaired 248M in 10h27m with 0 errors on Tue May 14 10:18:18 2013
config:

        NAME                                            STATE     READ WRITE CKSUM
        gra1                                            ONLINE       0     0     0
          raidz1-0                                      ONLINE       0     0     0
            gptid/f53806cb-fab1-11e1-89d0-14dae98ee84a  ONLINE       0     0     0
            gptid/59d2f087-5436-11e2-aa3a-14dae98ee84a  ONLINE       0     0     0
            gptid/19f779b3-e63a-11e0-9acd-14dae98ee84a  ONLINE       0     0     0
            gptid/bbc24e0e-1e2d-11e1-866b-14dae98ee84a  ONLINE       0     0    75

errors: No known data errors

I did a long test on my ada3 :

Code:

[root@freenas] ~# smarctl -a /dev/ada3

CORRECT>smartctl -a /dev/ada3 (y|n|e|a)? yes
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital AV-GP
Device Model:     WDC WD15EVDS-63V9B1
Serial Number:    WD-WMAVU3745542
LU WWN Device Id: 5 0014ee 0ad1c8197
Firmware Version: 01.00A01
User Capacity:    1,500,301,910,016 bytes [1.50 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed May 15 15:13:37 2013 AST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (33600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 383) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3037) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   253   253   021    Pre-fail  Always       -       5250
  4 Start_Stop_Count        0x0032   078   078   000    Old_age   Always       -       22234
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   085   085   000    Old_age   Always       -       11574
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       93
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       40
193 Load_Cycle_Count        0x0032   139   139   000    Old_age   Always       -       184450
194 Temperature_Celsius     0x0022   105   098   000    Old_age   Always       -       45
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       915472
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      80%     11560         -
# 2  Short offline       Completed without error       00%     11556         -
# 3  Short offline       Completed without error       00%     11556         -
# 4  Short offline       Interrupted (host reset)      90%     11536         -
# 5  Short offline       Completed without error       00%     11533         -
# 6  Short offline       Completed without error       00%     11509         -
# 7  Extended offline    Interrupted (host reset)      90%     11488         -
# 8  Extended offline    Interrupted (host reset)      90%     11487         -
# 9  Extended offline    Interrupted (host reset)      90%     11486         -
#10  Extended offline    Interrupted (host reset)      90%     11485         -
#11  Extended offline    Interrupted (host reset)      10%     11485         -
#12  Extended offline    Completed without error       00%     11476         -
#13  Short offline       Completed without error       00%     11467         -
#14  Short offline       Completed without error       00%     11443         -
#15  Short offline       Completed without error       00%     11419         -
#16  Short offline       Completed without error       00%     11395         -
#17  Extended offline    Completed without error       00%     11375         -
#18  Extended offline    Completed without error       00%     11369         -
#19  Extended offline    Completed without error       00%     11363         -
#20  Extended offline    Completed without error       00%     11357         -
#21  Short offline       Completed without error       00%     11347         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

I did change my sata cable en still having this CKSUM increasing.

I did run a long memtest without error

199 UDMA_CRC_Error_Count seems to be hihg, nope ?

thanks !

PS : I d'ont know if it could be related, but I can't proper restar my freenas or shutdown, freeze on :

Code:

ugen4.3: <JetFlash> at usbus4 (disconnected)
umass1 : at uhub4, port4, addr3 (disconnected)
(da1:umass-sim1:1:0:0): lost device - 0 outstanding, 1 refs

 

[huberte]

Really ? No one ?

 

[gpsguy]

I did a scrub, and still have CKSUM errors

The CKSUM errors won't go away, until you either clear the errors with the 'zpool clear' or replace the drive. If you do the "zpool clear", you need to monitor the status, in case there is really is a problem.

I did a long test on my ada3

Code:

[root@freenas] ~# smarctl -a /dev/ada3

That's not a test - you just displayed the results.

It appears that the long test never completed. Did you interrupt it?

Code:

Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
...
# 1  Extended offline    Interrupted (host reset)      80%     11560 

Here's the code for a long test: smartctl -t long /dev/ada3

Yes, the UDMA_CRC_Error_Count seems to be high - I'd replace the drive.

I d'ont know if it could be related, but I can't proper restart my freenas or shutdown

If these operations don't work properly, then yes, it could create these issues and potentially corrupt your pool.

You need to solve this problem right away.

What is connected to usbus4?

 

[cyberjock]

I had to laugh at the UDMA_CRC_Error_Count = 915472. In Windows 2000 and newer, if Windows records 5(yes, five) errors of UDMA CRC errors over the OS' life it disables UDMA for that SATA controller channel. Yes, this value survives reboots. Then hilarity(and major performance penalties) ensue because those super fast SSDs and high performance drives that we all own suddenly won't go above 25MB/sec. Additionally, since UDMA is disabled all hard drive access require your CPU to wait for the drive to reply which tanks performance in ways you'd never imagine. Woohoo! There is a registry change you have to do to reset the value to zero and get back UDMA. Not much fun in the Windows world.

Anyway, the CRC errors are most commonly caused by either the SATA/IDE controller or SATA/IDE cable itself. I'd try replacing the cable first to see if that stops the errors from continuing to increase.

 

[huberte]

Thanks both of you for your answers :)

The CKSUM errors won't go away, until you either clear the errors with the 'zpool clear' or replace the drive. If you do the "zpool clear", you need to monitor the status, in case there is really is a problem.

I did previously a zpool clean then a zpool scrub. What do you mean by monitoring the status ?

That's not a test - you just displayed the results.

It appears that the long test never completed. Did you interrupt it?

Code:

Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
...
# 1  Extended offline    Interrupted (host reset)      80%     11560 

Here's the code for a long test: smartctl -t long /dev/ada3

I did the long test command line. Don't know why it will be interrupted ?

Code:

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 383 minutes for test to complete.

What is connected to usbus4?

I think it's my thumb drive where my plugins are stored, with my jail. How do I check that ?

EDIT :

Code:

May 15 15:05:26 freenas kernel: ugen4.2: <SanDisk> at usbus4
May 15 15:05:26 freenas kernel: umass0: <SanDisk Cruzer Slice, class 0/0, rev 2.00/1.26, addr 2> on usbus4
May 15 15:05:26 freenas kernel: ugen4.3: <JetFlash> at usbus4
May 15 15:05:26 freenas kernel: umass1: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 3> on usbus4
May 15 15:05:26 freenas kernel: ada0 at ata2 bus 0 scbus1 target 0 lun 0

I had to laugh at the UDMA_CRC_Error_Count = 915472. (....)

Anyway, the CRC errors are most commonly caused by either the SATA/IDE controller or SATA/IDE cable itself. I'd try replacing the cable first to see if that stops the errors from continuing to increase.

Yeah still remember on w2000, rebooting and checking udma again and again :)

You mean Freenas won't update this number ? Read my post, I did already change my cable, nothing change, still this cksum increasing.....

 

[gpsguy]

Please let it run for 383 minutes, run: smarctl -a /dev/ada3

and report back with the results.

Please wait 383 minutes for test to complete.

I did have a more detailed response, but accidentally closed my browser.

 

[huberte]

i did a second long test and it ran fine. i think I have an issue with my GUI and SMART planning. I never had result. Somehow a process ends the smart test (one short per day, one long per month)

here again my status :

Code:

[root@freenas] ~# smartctl -a /dev/ada3
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital AV-GP
Device Model:     WDC WD15EVDS-63V9B1
Serial Number:    WD-WMAVU3745542
LU WWN Device Id: 5 0014ee 0ad1c8197
Firmware Version: 01.00A01
User Capacity:    1,500,301,910,016 bytes [1.50 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon May 20 20:27:48 2013 AST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x85) Offline data collection activity
                                        was aborted by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (33600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 383) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3037) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   253   253   021    Pre-fail  Always       -       6100
  4 Start_Stop_Count        0x0032   078   078   000    Old_age   Always       -       22433
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   084   084   000    Old_age   Always       -       11699
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       93
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       40
193 Load_Cycle_Count        0x0032   139   139   000    Old_age   Always       -       184650
194 Temperature_Celsius     0x0022   113   098   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       915472
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     11699         -
# 2  Extended offline    Completed without error       00%     11681         -
# 3  Short offline       Completed without error       00%     11675         -
# 4  Short offline       Completed without error       00%     11651         -
# 5  Short offline       Completed without error       00%     11627         -
# 6  Extended offline    Completed without error       00%     11607         -
# 7  Extended offline    Completed without error       00%     11601         -
# 8  Extended offline    Completed without error       00%     11595         -
# 9  Extended offline    Completed without error       00%     11589         -
#10  Short offline       Completed without error       00%     11579         -
#11  Extended offline    Interrupted (host reset)      80%     11560         -
#12  Short offline       Completed without error       00%     11556         -
#13  Short offline       Completed without error       00%     11556         -
#14  Short offline       Interrupted (host reset)      90%     11536         -
#15  Short offline       Completed without error       00%     11533         -
#16  Short offline       Completed without error       00%     11509         -
#17  Extended offline    Interrupted (host reset)      90%     11488         -
#18  Extended offline    Interrupted (host reset)      90%     11487         -
#19  Extended offline    Interrupted (host reset)      90%     11486         -
#20  Extended offline    Interrupted (host reset)      90%     11485         -
#21  Extended offline    Interrupted (host reset)      10%     11485         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

And my CKSUM increasing :

Code:

[root@freenas] ~# zpool status -v
  pool: gra1
 state: ONLINE
status: One or more devices has experienced an unrecoverable error.  An
        attempt was made to correct the error.  Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
        using 'zpool clear' or replace the device with 'zpool replace'.
   see: http://www.sun.com/msg/ZFS-8000-9P
  scan: scrub repaired 248M in 10h27m with 0 errors on Tue May 14 10:18:18 2013
config:

        NAME                                            STATE     READ WRITE CKSUM
        gra1                                            ONLINE       0     0     0
          raidz1-0                                      ONLINE       0     0     0
            gptid/f53806cb-fab1-11e1-89d0-14dae98ee84a  ONLINE       0     0     0
            gptid/59d2f087-5436-11e2-aa3a-14dae98ee84a  ONLINE       0     0     0
            gptid/19f779b3-e63a-11e0-9acd-14dae98ee84a  ONLINE       0     0     0
            gptid/bbc24e0e-1e2d-11e1-866b-14dae98ee84a  ONLINE       0     0   239

errors: No known data errors

  pool: usb
 state: ONLINE
  scan: none requested
config:

        NAME                                          STATE     READ WRITE CKSUM
        usb                                           ONLINE       0     0     0
          gptid/87bf830d-55f9-11e2-8f4c-14dae98ee84a  ONLINE       0     0     0

errors: No known data errors

 

[cyberjock]

i did a second long test and it ran fine. i think I have an issue with my GUI and SMART planning. I never had result. Somehow a process ends the smart test (one short per day, one long per month)

You don't get results provided, you query the hard drive SMART info and look at it. Also, the hard drive has no concept of what day it is. It only knows how many hours its been powered on.

Look at the bold below....

Code:

[root@freenas] ~# smartctl -a /dev/ada3

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   253   253   021    Pre-fail  Always       -       6100
  4 Start_Stop_Count        0x0032   078   078   000    Old_age   Always       -       22433
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   084   084   000    Old_age   Always       -       11699
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       93
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       40
193 Load_Cycle_Count        0x0032   139   139   000    Old_age   Always       -       184650
194 Temperature_Celsius     0x0022   113   098   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       915472
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     11699         -
# 2  Extended offline    Completed without error       00%     11681         -
# 3  Short offline       Completed without error       00%     11675         -
# 4  Short offline       Completed without error       00%     11651         -
# 5  Short offline       Completed without error       00%     11627         -
# 6  Extended offline    Completed without error       00%     11607         -
# 7  Extended offline    Completed without error       00%     11601         -
# 8  Extended offline    Completed without error       00%     11595         -
# 9  Extended offline    Completed without error       00%     11589         -
#10  Short offline       Completed without error       00%     11579         -
#11  Extended offline    Interrupted (host reset)      80%     11560         -
#12  Short offline       Completed without error       00%     11556         -
#13  Short offline       Completed without error       00%     11556         -
#14  Short offline       Interrupted (host reset)      90%     11536         -
#15  Short offline       Completed without error       00%     11533         -
#16  Short offline       Completed without error       00%     11509         -
#17  Extended offline    Interrupted (host reset)      90%     11488         -
#18  Extended offline    Interrupted (host reset)      90%     11487         -
#19  Extended offline    Interrupted (host reset)      90%     11486         -
#20  Extended offline    Interrupted (host reset)      90%     11485         -
#21  Extended offline    Interrupted (host reset)      10%     11485         -

At the time of your post your hard drive was on hour 11699. Notice that the latest short test happened in the same power-on hour as the SMART data you posted. The Long test(line #2) completed 18 hours prior(at power-on hour 11681). The long test completed without errors. The fact that it completed without errors and SMART info looks good otherwise tends to confirm that the hard drive is fine.

And my CKSUM increasing :

Code:

[root@freenas] ~# zpool status -v
  pool: gra1
 state: ONLINE
status: One or more devices has experienced an unrecoverable error.  An
        attempt was made to correct the error.  Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
        using 'zpool clear' or replace the device with 'zpool replace'.
   see: http://www.sun.com/msg/ZFS-8000-9P
  scan: scrub repaired 248M in 10h27m with 0 errors on Tue May 14 10:18:18 2013
config:

        NAME                                            STATE     READ WRITE CKSUM
        gra1                                            ONLINE       0     0     0
          raidz1-0                                      ONLINE       0     0     0
            gptid/f53806cb-fab1-11e1-89d0-14dae98ee84a  ONLINE       0     0     0
            gptid/59d2f087-5436-11e2-aa3a-14dae98ee84a  ONLINE       0     0     0
            gptid/19f779b3-e63a-11e0-9acd-14dae98ee84a  ONLINE       0     0     0
            gptid/bbc24e0e-1e2d-11e1-866b-14dae98ee84a  ONLINE       0     0   239

errors: No known data errors

  pool: usb
 state: ONLINE
  scan: none requested
config:

        NAME                                          STATE     READ WRITE CKSUM
        usb                                           ONLINE       0     0     0
          gptid/87bf830d-55f9-11e2-8f4c-14dae98ee84a  ONLINE       0     0     0

errors: No known data errors

Yeah, the fact that the CKSUM is increasing is definitely a bad sign. I'd try hooking up the hard drive to a different SATA port. If that doesn't work I'd try a different SATA controller(assuming your motherboard has more than 1 or you have a spare one lying around). You could perhaps try lowering the SATA speed from 3.0Gbps to 1.5Gbps too and see if that helps. Was the SATA cable you put in the computer new? Any chance it is broken too? I know its rare to have 2 of the same thing bad, but the CRC error is almost always not the hard drive. Granted, the hard drive can be the problem if the hard drive is somehow having problems with data corruption due to firmware bugs or something, but that's extremely rare.

Also, I just noticed you have a boo-boo in your configuration. Your hard drive is green powered and shouldn't be used in any non-desktop or RAID environment without using the wdidle tool to change the time to park the heads. WD considers the drive to be rated for 300k-500k cycles, and according to SMART parameter #193 you are already at about 185k. Just as a comparison, my drive have been powered on non-stop for almost 3 years and none have over 25k because I changed my setting(I have 24 Green drives in my server). This is something that should be fixed sooner than later, but is not something you shouldn't worry about right now(the CRCs should be your bigger concern). It's super easy to do and takes just a few seconds with a DOS boot disk. If you search the forum for wdidle I'm sure you'll find a thread where I discussed this in great length. My drives are set to 300 seconds. The latest version is 1.05 if you want to search for a download link in Google. The fact that you haven't used the wdidle tool is not the cause for your CRC errors.

Just to recap so its clear, the issue is not likely the hard drive. So your SATA cable(s) suck(crappy brand?) or the particular SATA port your hard drive is connected to sucks, or your SATA controller sucks. Now you just need to figure out which one it is. ;)