I'm very new to the freenas community and I don't have that much experience with servers. Everyone has to start somewhere so I started head first. That being said I did a few noob mistakes in a row to to put myself in this situation.
Running 9.10 stable. I don't have any crash logs(helpful I know). I did have a crash and an alert came up for critical error that said there could be corruption. Then next the array status was unknown. I tried reading forums and thought a factory reset would help(noob). That's where I'm at now. Trying to import my drives and get the "one or more drives are currently unavailable". I see all my drives and I don't see anything wrong with them so far. I can live with loosing the data from my inexperience and stupidity but if possibly I'd love to recover some of it.
[root@freenas ~]# zpool import -f
pool: Main6Array
id: 16645416043333463440
state: ONLINE
action: The pool can be imported using its name or numeric identifier.
config:
Main6Array ONLINE
raidz2-0 ONLINE
gptid/ddee2f47-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/def45121-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/dff52dd0-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/e0bf228b-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/e1bc0fe7-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/e2b8e5ee-2a8c-11e6-b3ce-408d5c573982 ONLINE
[root@freenas ~]# zpool import -f Main6Array
cannot import 'Main6Array': one or more devices is currently unavailable
[root@freenas ~]# camcontrol devlist
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus0 target 0 lun 0 (ada0,pass0)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus0 target 1 lun 0 (ada1,pass1)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus1 target 0 lun 0 (ada2,pass2)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus1 target 1 lun 0 (ada3,pass3)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus2 target 0 lun 0 (ada4,pass4)
<WDC WD30EFRX-68AX9N0 80.00A80> at scbus3 target 0 lun 0 (ada5,pass5)
<SanDisk Cruzer Fit 1.00> at scbus5 target 0 lun 0 (pass6,da0)
[root@freenas ~]#
Running 9.10 stable. I don't have any crash logs(helpful I know). I did have a crash and an alert came up for critical error that said there could be corruption. Then next the array status was unknown. I tried reading forums and thought a factory reset would help(noob). That's where I'm at now. Trying to import my drives and get the "one or more drives are currently unavailable". I see all my drives and I don't see anything wrong with them so far. I can live with loosing the data from my inexperience and stupidity but if possibly I'd love to recover some of it.
[root@freenas ~]# zpool import -f
pool: Main6Array
id: 16645416043333463440
state: ONLINE
action: The pool can be imported using its name or numeric identifier.
config:
Main6Array ONLINE
raidz2-0 ONLINE
gptid/ddee2f47-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/def45121-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/dff52dd0-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/e0bf228b-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/e1bc0fe7-2a8c-11e6-b3ce-408d5c573982 ONLINE
gptid/e2b8e5ee-2a8c-11e6-b3ce-408d5c573982 ONLINE
[root@freenas ~]# zpool import -f Main6Array
cannot import 'Main6Array': one or more devices is currently unavailable
[root@freenas ~]# camcontrol devlist
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus0 target 0 lun 0 (ada0,pass0)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus0 target 1 lun 0 (ada1,pass1)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus1 target 0 lun 0 (ada2,pass2)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus1 target 1 lun 0 (ada3,pass3)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus2 target 0 lun 0 (ada4,pass4)
<WDC WD30EFRX-68AX9N0 80.00A80> at scbus3 target 0 lun 0 (ada5,pass5)
<SanDisk Cruzer Fit 1.00> at scbus5 target 0 lun 0 (pass6,da0)
[root@freenas ~]#