Str4ng3Th1ng5
Cadet
- Joined
- Mar 14, 2014
- Messages
- 4
Hi, I'm new to FreeNAS and am currently using version 9.2-Release-p3. I've been having an interesting problem of not being able to access my pool after a WebGUI upgrade about 2 weeks ago. This is my current setup:
When I try an AutoImport at the WebGUI, I get this: Error: The volume "POIMI_NAS" failed to import, for further details check pool status
At the Shell I get
I also did
So I export my pool and tried to import it at the command line, this is what I got
Then I followed up with the zpool list and this is what I got
Its really becoming frustrating, I've checked the forum for possible solution but I don't think that I've found anyone with my exact problem. I've even tried loading a fresh Freenas install from different USB drives, and autoimporting my pool, but no luck. I've also tried enabling the CIFS from the webgui, but it doesn't enable.
Prior to the upgrade I did a config backup, which I've tried to restore but in doing so I'm not able to gain access to the webgui, as well as I keep get an ntpd_initres error. I have to reset to factory defaults in order to be able to login and gain access to the webgui. However, in restoring the backup I don't get the mountpoint errors seen above, in fact when I import from the shell it appears that everything runs fine.
=================================================================
DMESG
IFCONFIG
PCICONF -LV
Thanks for any assist.
System Specs:
Motherboard: ASRock E35LM1 AMD E-240 APU AMD A50M Mini ITX MotherboardBIOS Firmware Revision: 1.80CPU: AMD E-240 APU (1.5Ghz Onboard)RAM: 8GB (2x4GB)NIC: Realtek 8111EVideo: AMD Radeon HD 6310 graphics (Onboard Chipset)HDDs: 6 x 3TB (WD Red 3 TB NAS Hard Drive)ADDin Card: Silverstone Tek PCI Express Card with 2 SATA 6 Gbps Internal Ports (EC05)USB: 8GB Staples
When I try an AutoImport at the WebGUI, I get this: Error: The volume "POIMI_NAS" failed to import, for further details check pool status
At the Shell I get
Code:
[root@POIMI] ~# zpool status pool: POIMI_NAS state: ONLINE scan: scrub repaired 0 in 80h4m with 0 errors on Tue Mar 11 06:25:57 2014 config: NAME STATE READ WRITE CKSUM POIMI_NAS ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/6ec3be4d-5035-11e2-ba7c-bc5ff4445e38 ONLINE 0 0 0 gptid/6f3b9862-5035-11e2-ba7c-bc5ff4445e38 ONLINE 0 0 0 gptid/6fb053f3-5035-11e2-ba7c-bc5ff4445e38 ONLINE 0 0 0 gptid/70293066-5035-11e2-ba7c-bc5ff4445e38 ONLINE 0 0 0 gptid/709f8ea1-5035-11e2-ba7c-bc5ff4445e38 ONLINE 0 0 0 gptid/71160985-5035-11e2-ba7c-bc5ff4445e38 ONLINE 0 0 0 errors: No known data errors
I also did
Code:
[root@POIMI] ~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT POIMI_NAS 16.2T 11.6T 4.69T 71% 1.00x ONLINE /mnt
So I export my pool and tried to import it at the command line, this is what I got
Code:
[root@POIMI] ~# zpool import POIMI_NAS cannot mount '/POIMI_NAS': failed to create mountpoint cannot mount '/POIMI_NAS/.samba4': failed to create mountpoint cannot mount '/POIMI_NAS/.system': failed to create mountpoint cannot mount '/POIMI_NAS/.system/cores': failed to create mountpoint cannot mount '/POIMI_NAS/.system/samba4': failed to create mountpoint cannot mount '/POIMI_NAS/.system/syslog': failed to create mountpoint cannot mount '/POIMI_NAS/POIMI_MEDIA': failed to create mountpoint cannot mount '/POIMI_NAS/POIMI_MEDIA/POIMI_Events': failed to create mountpoint
Then I followed up with the zpool list and this is what I got
Code:
[root@POIMI] ~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT POIMI_NAS 16.2T 11.6T 4.69T 71% 1.00x ONLINE -
Its really becoming frustrating, I've checked the forum for possible solution but I don't think that I've found anyone with my exact problem. I've even tried loading a fresh Freenas install from different USB drives, and autoimporting my pool, but no luck. I've also tried enabling the CIFS from the webgui, but it doesn't enable.
Prior to the upgrade I did a config backup, which I've tried to restore but in doing so I'm not able to gain access to the webgui, as well as I keep get an ntpd_initres error. I have to reset to factory defaults in order to be able to login and gain access to the webgui. However, in restoring the backup I don't get the mountpoint errors seen above, in fact when I import from the shell it appears that everything runs fine.
=================================================================
DMESG
Code:
[root@POIMI] ~# dmesg Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.2-RELEASE-p3 #0 r262572+825d682: Sat Mar 1 10:02:19 PST 2014 root@build.ixsystems.com:/home/jkh/checkout/freenas/os-base/amd64/tank/home/jkh/checkout/freenas/FreeBSD/src/ sys/FREENAS.amd64 amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: AMD E-240 Processor (1500.03-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x500f10 Family = 0x14 Model = 0x1 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE ,SSE2> Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x35fd<LAHF,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT> TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8191279104 (7811 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <ALASKA A M I> WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt- 586) ioapic0: Changing APIC ID to 0 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. padlock0: No ACE support. acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xfc000000-0xfdffffff,0xfeb00000-0xfeb3ffff irq 18 at de vice 1.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ahci0: <Marvell 88SE9130 AHCI SATA controller> port 0xe040-0xe047,0xe030-0xe033,0xe020-0xe027,0xe010-0xe013,0xe00 0-0xe00f mem 0xfea10000-0xfea107ff irq 16 at device 0.0 on pci1 ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported ahci0: quirks=0x800<ALTSIG> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich6: <AHCI channel> at channel 6 on ahci0 ahcich7: <AHCI channel> at channel 7 on ahci0 ahci1: <ATI IXP700 AHCI SATA controller> port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf1 5f mem 0xfeb47000-0xfeb473ff irq 19 at device 17.0 on pci0 ahci1: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported ahcich8: <AHCI channel> at channel 0 on ahci1 ahcich9: <AHCI channel> at channel 1 on ahci1 ahcich10: <AHCI channel> at channel 2 on ahci1 ahcich11: <AHCI channel> at channel 3 on ahci1 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb46000-0xfeb46fff irq 18 at device 18.0 on pci0 usbus0 on ohci0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb45000-0xfeb450ff irq 17 at device 18.2 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb44000-0xfeb44fff irq 18 at device 19.0 on pci0 usbus2 on ohci1 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb43000-0xfeb430ff irq 17 at device 19.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f irq 17 at dev ice 20.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb42000-0xfeb42fff irq 18 at device 20.5 on pci0 usbus4 on ohci2 pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe004000-0xfe004fff,0xf e000000-0xfe003fff irq 17 at device 0.0 on pci4 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto- flow re0: Ethernet address: bc:5f:f4:44:5e:38 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb41000-0xfeb41fff irq 18 at device 22.0 on pci0 usbus5 on ohci3 ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb40000-0xfeb400ff irq 17 at device 22.2 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci2 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xce800-0xd17ff on isa0 amdsbwd0: <AMD SB8xx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 wbwd0: DevID 0xb4 DevRev 0x73, will not attach, please report this. acpi_throttle0: <ACPI CPU Throttling> on cpu0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled DUMMYNET 0xfffffe00041ccc80 with IPv6 initialized (100409) load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <ATI> at usbus6 uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 uhub4: 2 ports with 2 removable, self powered uhub5: 4 ports with 4 removable, self powered uhub0: 5 ports with 5 removable, self powered uhub2: 5 ports with 5 removable, self powered uhub6: 4 ports with 4 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered ugen1.2: <Staples> at usbus1 umass0: <Staples Staples Relay, class 0/0, rev 2.00/11.00, addr 2> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:15:0:-1: Attached to scbus15 ahcich7: Poll timeout on slot 0 port 0 ahcich7: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 50 serr 00000000 cmd 10000006 (aprobe2:ahcich7:0:0:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 (aprobe2:ahcich7:0:0:0): CAM status: Command timeout (aprobe2:ahcich7:0:0:0): Error 5, Retries exhausted ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device ada0: Serial Number WD-WMC1T1131416 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada0: quirks=0x1<4K> ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device ada1: Serial Number WD-WMC1T1137437 ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada1: quirks=0x1<4K> ada1: Previously was known as ad6 ada2 at ahcich8 bus 0 scbus8 target 0 lun 0 ada2: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device ada2: Serial Number WD-WMC1T0981656 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada2: quirks=0x1<4K> ada2: Previously was known as ad20 ada3 at ahcich9 bus 0 scbus9 target 0 lun 0 ada3: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device ada3: Serial Number WD-WMC1T1130542 ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada3: quirks=0x1<4K> ada3: Previously was known as ad22 ada4 at ahcich10 bus 0 scbus10 target 0 lun 0 ada4: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device ada4: Serial Number WD-WMC1T1137605 ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada4: quirks=0x1<4K> ada4: Previously was known as ad24 ada5 at ahcich11 bus 0 scbus11 target 0 lun 0 ada5: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device ada5: Serial Number WD-WMC1T1112403 ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada5: quirks=0x1<4K> ada5: Previously was known as ad26 Timecounter "TSC" frequency 1500029379 Hz quality 1000 da0 at umass-sim0 bus 0 scbus15 target 0 lun 0 da0: <Staples Relay 1100> Removable Direct Access SCSI-4 device da0: Serial Number AA34104000005568 da0: 40.000MB/s transfers da0: 7788MB (15950592 512 byte sectors: 255H 63S/T 992C) da0: quirks=0x2<NO_6_BYTE> Trying to mount root from ufs:/dev/ufs/FreeNASs1a [ro]... link_elf_obj: symbol _mtx_init undefined linker_load_file: Unsupported file type GEOM_ELI: Device ada0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada1p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada2p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada3p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada4p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada5p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software ZFS filesystem version: 5 ZFS storage pool version: features support (5000)
IFCONFIG
Code:
[root@POIMI] ~# ifconfig re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> ether bc:5f:f4:44:5e:38 inet 192.168.1.4 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet autoselect (1000baseT <full-duplex>) status: active ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536 nd6 options=9<PERFORMNUD,IFDISABLED> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
PCICONF -LV
Code:
[root@POIMI] ~# pciconf -lv hostb0@pci0:0:0:0: class=0x060000 card=0x15101849 chip=0x15101022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 14h Processor Root Complex' class = bridge subclass = HOST-PCI vgapci0@pci0:0:1:0: class=0x030000 card=0x98031849 chip=0x98031002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' class = display subclass = VGA pcib1@pci0:0:4:0: class=0x060400 card=0x15121849 chip=0x15121022 rev=0x00 hdr=0x01 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 14h Processor Root Port' class = bridge subclass = PCI-PCI ahci1@pci0:0:17:0: class=0x010601 card=0x43911849 chip=0x43911002 rev=0x40 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]' class = mass storage subclass = SATA ohci0@pci0:0:18:0: class=0x0c0310 card=0x43971849 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller' class = serial bus subclass = USB ehci0@pci0:0:18:2: class=0x0c0320 card=0x43961849 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller' class = serial bus subclass = USB ohci1@pci0:0:19:0: class=0x0c0310 card=0x43971849 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller' class = serial bus subclass = USB ehci1@pci0:0:19:2: class=0x0c0320 card=0x43961849 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller' class = serial bus subclass = USB none0@pci0:0:20:0: class=0x0c0500 card=0x43851849 chip=0x43851002 rev=0x42 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SBx00 SMBus Controller' class = serial bus subclass = SMBus atapci0@pci0:0:20:1: class=0x01018a card=0x439c1849 chip=0x439c1002 rev=0x40 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 IDE Controller' class = mass storage subclass = ATA isab0@pci0:0:20:3: class=0x060100 card=0x439d1849 chip=0x439d1002 rev=0x40 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 LPC host controller' class = bridge subclass = PCI-ISA pcib2@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01 vendor = 'ATI Technologies Inc' device = 'SBx00 PCI to PCI Bridge' class = bridge subclass = PCI-PCI ohci2@pci0:0:20:5: class=0x0c0310 card=0x43991849 chip=0x43991002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB OHCI2 Controller' class = serial bus subclass = USB pcib3@pci0:0:21:0: class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' device = 'SB700/SB800 PCI to PCI bridge (PCIE port 0)' class = bridge subclass = PCI-PCI pcib4@pci0:0:21:1: class=0x060400 card=0x00001002 chip=0x43a11002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' device = 'SB700/SB800 PCI to PCI bridge (PCIE port 1)' class = bridge subclass = PCI-PCI ohci3@pci0:0:22:0: class=0x0c0310 card=0x43971849 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller' class = serial bus subclass = USB ehci2@pci0:0:22:2: class=0x0c0320 card=0x43961849 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller' class = serial bus subclass = USB hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x17001022 rev=0x43 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 12h/14h Processor Function 0' class = bridge subclass = HOST-PCI hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x17011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 12h/14h Processor Function 1' class = bridge subclass = HOST-PCI hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x17021022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 12h/14h Processor Function 2' class = bridge subclass = HOST-PCI hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x17031022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 12h/14h Processor Function 3' class = bridge subclass = HOST-PCI hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x17041022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 12h/14h Processor Function 4' class = bridge subclass = HOST-PCI hostb6@pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x17181022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 12h/14h Processor Function 6' class = bridge subclass = HOST-PCI hostb7@pci0:0:24:6: class=0x060000 card=0x00000000 chip=0x17161022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 12h/14h Processor Function 5' class = bridge subclass = HOST-PCI hostb8@pci0:0:24:7: class=0x060000 card=0x00000000 chip=0x17191022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Family 12h/14h Processor Function 7' class = bridge subclass = HOST-PCI ahci0@pci0:1:0:0: class=0x010601 card=0x91231b4b chip=0x91301b4b rev=0x11 hdr=0x00 vendor = 'Marvell Technology Group Ltd.' device = '88SE9128 PCIe SATA 6 Gb/s RAID controller with HyperDuo' class = mass storage subclass = SATA re0@pci0:4:0:0: class=0x020000 card=0x81681849 chip=0x816810ec rev=0x06 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet
Thanks for any assist.