hi (sorry for my english...)
I just installed freenas8 (after use of freenas 0.7.2)
The disks to be added does not appear anymore.
The first time it was OK, I had :
Import Volume (with several choice ) :
ada0p1 (200 MiB)
ada0p2 (904.3 GiB)
ada0p3 (140,9GiB)
ada0p4 (817,2 GiB)
Now I don't see anything anymore ???
I cannot format or do anything.
Create or import does not show the disk.
What did I do? I do'nt know.
The disk is not «*bad*», I can, under ssh (with mac terminal), see :
freenas# smartctl -a /dev/ada0
Device Model: SAMSUNG HD204UI
Serial Number: S2H7J1DB102860
or
freenas# egrep '^ad[0-9]|^ada[0-9]' /var/run/dmesg.boot
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <SAMSUNG HD20da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 1907728MB (3907027055 512 byte sectors: 16H 63S/T 16383C)
I physically disconnect the disk and format it with my mac (HFS+), fine, but he does'not show up in freenas.
I am tryning to format with windows/fusion in NTFS, but it is very slow. Will it work I am not sure.
Help .
Why thoses disks do not show up for creation or import?
I suppose I should have a «good» format to have a "new" disk, but which and how?
Many thanks for yours answers or ideas.
Dominique
PS I have 6 disks connected in sata. 3 are mounted and working OK, but the same problem appears now with the 3 others which does not... appear....
I just installed freenas8 (after use of freenas 0.7.2)
The disks to be added does not appear anymore.
The first time it was OK, I had :
Import Volume (with several choice ) :
ada0p1 (200 MiB)
ada0p2 (904.3 GiB)
ada0p3 (140,9GiB)
ada0p4 (817,2 GiB)
Now I don't see anything anymore ???
I cannot format or do anything.
Create or import does not show the disk.
What did I do? I do'nt know.
The disk is not «*bad*», I can, under ssh (with mac terminal), see :
freenas# smartctl -a /dev/ada0
Device Model: SAMSUNG HD204UI
Serial Number: S2H7J1DB102860
or
freenas# egrep '^ad[0-9]|^ada[0-9]' /var/run/dmesg.boot
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <SAMSUNG HD20da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 1907728MB (3907027055 512 byte sectors: 16H 63S/T 16383C)
I physically disconnect the disk and format it with my mac (HFS+), fine, but he does'not show up in freenas.
I am tryning to format with windows/fusion in NTFS, but it is very slow. Will it work I am not sure.
Help .
Why thoses disks do not show up for creation or import?
I suppose I should have a «good» format to have a "new" disk, but which and how?
Many thanks for yours answers or ideas.
Dominique
PS I have 6 disks connected in sata. 3 are mounted and working OK, but the same problem appears now with the 3 others which does not... appear....