hako
Cadet
- Joined
- Mar 23, 2022
- Messages
- 1
I have a hard drive from my computer that I want to import into my pool, since the network share is being weird and not copying things correctly.
I only have six SATA ports on my motherboard, and all of them are filled. (1: boot drive, 2-6: pool drives)
Is it okay if I offline and disconnect one single disk from my pool to quickly import the data from my drive, and then have the pool resilver afterwards?
The pool and drives are all very young, so I'm not concerned with any of them possibly failing when rebuilding.
Alternatively, could I remove the boot pool while TrueNAS is already running? I'm assuming that's a 'no', but you never know...
Here is my pool:
I only have six SATA ports on my motherboard, and all of them are filled. (1: boot drive, 2-6: pool drives)
Is it okay if I offline and disconnect one single disk from my pool to quickly import the data from my drive, and then have the pool resilver afterwards?
The pool and drives are all very young, so I'm not concerned with any of them possibly failing when rebuilding.
Alternatively, could I remove the boot pool while TrueNAS is already running? I'm assuming that's a 'no', but you never know...
Here is my pool:
Code:
pool: boot-pool state: ONLINE scan: scrub repaired 0B in 00:00:04 with 0 errors on Thu Mar 17 03:45:04 2022 config: NAME STATE READ WRITE CKSUM boot-pool ONLINE 0 0 0 ada0p2 ONLINE 0 0 0 errors: No known data errors pool: z1pool state: ONLINE scan: scrub repaired 0B in 01:02:51 with 0 errors on Tue Mar 15 07:56:03 2022 config: NAME STATE READ WRITE CKSUM z1pool ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/d7cb209d-a17d-11ec-9fe3-f4b520018e85 ONLINE 0 0 0 gptid/d7a1f700-a17d-11ec-9fe3-f4b520018e85 ONLINE 0 0 0 gptid/d7b65f2f-a17d-11ec-9fe3-f4b520018e85 ONLINE 0 0 0 gptid/d7e2a6d0-a17d-11ec-9fe3-f4b520018e85 ONLINE 0 0 0 gptid/d7f6152a-a17d-11ec-9fe3-f4b520018e85 ONLINE 0 0 0 errors: No known data errors