KhitSicker
Cadet
- Joined
- May 24, 2019
- Messages
- 3
I had an extended power outage while away from home yesterday and my freenas 11.2 will not longer boot. The system will post and all the HDDs are detected by the sas controllers but it stop at "Shortening read at 62656632 from 16 to 9" the system locks up at this point and has to be hard powered off.
I had Freenas running off a 32gb usb stick I reinstalled it on a brand new stick and still get the same error. I have tried all the usb ports on the server with no luck.
the hardware is an old supermicro 4u intel chassis with 16 3.5in bays and 16gb ram. I have all 16 bays full of 4tb sata drives running on 2 LSI 9211-8i cards. All the hdds showup in the drive listings and dont appear to have any issues. Everything was working properly before the power outage.
any ideas?
I had Freenas running off a 32gb usb stick I reinstalled it on a brand new stick and still get the same error. I have tried all the usb ports on the server with no luck.
the hardware is an old supermicro 4u intel chassis with 16 3.5in bays and 16gb ram. I have all 16 bays full of 4tb sata drives running on 2 LSI 9211-8i cards. All the hdds showup in the drive listings and dont appear to have any issues. Everything was working properly before the power outage.
any ideas?