Credo
Dabbler
- Joined
- May 28, 2011
- Messages
- 28
Hello All,
I'm hoping someone has a quick answer here for me. I've got an Adaptec card with two 1tb drives configured as a RAID 0 (striped) array. The problem I'm having is when I log into the server, when I add the new array as a volume, FreeNAS is still picking up both drives independently as opposed to a single raid. Even though they're detected as a RAID 0 during post. It wouldn't be a huge problem, except I wanted to use the raw RAID config as a single device extent in the iSCSI configuration, but they're just being picked up as separate disks...
Any suggestions?
Thanks in advance!
C.
I'm hoping someone has a quick answer here for me. I've got an Adaptec card with two 1tb drives configured as a RAID 0 (striped) array. The problem I'm having is when I log into the server, when I add the new array as a volume, FreeNAS is still picking up both drives independently as opposed to a single raid. Even though they're detected as a RAID 0 during post. It wouldn't be a huge problem, except I wanted to use the raw RAID config as a single device extent in the iSCSI configuration, but they're just being picked up as separate disks...
Any suggestions?
Thanks in advance!
C.