8.2 to 9.2, No Drives Detected

[migsutu]

I upgraded from 8.2 to 9.2 today. The upgrade went smoothly, but I had a yellow alert icon in the GUI, saying not able to detect pool or something along those lines. I have a backup so I went ahead and did a fresh install from scratch and planned to recreate my zpool. However apparently with 9.2, FREENAS is unable to detect my drives and/or controller. I am using a Highpoint 4 port PCIe controller, which never had issues in 8.2.

I guess what I need to do first is see if FREENAS sees the controller, but I am not sure which commands to enter into the shell. What is the first steps I should do to troubleshoot? I was looking for the old diagnostic area but couldn't find that either. Any help is appreciated.

 

[cyberjock]

Post the output of "dmesg" and "zpool import" and "camcontrol devlist". Normally dmesg should show your Highpoint controller at some point.

To be honest, when I see Highpoint's name on these forums I cringe. They've been problem children since day one... this coming from the guy that's the unofficial Highpoint wizard in this forum. I won't be the least bit surprised if there aren't Highpoint drivers for FreeBSD 9.x for your card.

If you are only interested in getting your server back up and running you should start looking for IBM M1015s on ebay. They're about $125 shipped.

 

[migsutu]

Here, well I didn't have much choice controller wise. I have it on a via nano board, and I needed 4 ports. I can't remember why but it was the only option. Worked quite well with 8.2(as far as problem free). dmesg is exactly what I was trying to remember but I was hitting my head and couldn't remember, and couldn't properly use google to find it. Anyways, I don't see it personally in the list. I may have to jump back to 8.2. Another oddity but my system info is only showing 2.9GB of ram. I could have sworn I had 8 in this machine.....will have visually confirm that. Regardless here is the output. Thanks again for the help.

dmesg:

Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-RELEASE #0 r+2315ea3: Fri Dec 20 12:48:50 PST 2013
root@build.ixsystems.com:/tank/home/jkh/checkout/freenas/os-base/amd64/tank/
home/jkh/checkout/freenas/FreeBSD/src/sys/FREENAS.amd64 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: VIA Nano processor L2200@1600MHz (1615.82-MHz K8-class CPU)
Origin = "CentaurHauls" Id = 0x6f2 Family = 0x6 Model = 0xf Stepping = 2
Features=0xafc9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x63a9<SSE3,MON,VMX,EST,TM2,SSSE3,CX16,xTPR>
AMD Features=0x2a100800<SYSCALL,NX,FFXSR,RDTSCP,LM>
AMD Features2=0x1<LAHF>
VIA Padlock Features=0x70dcc<RNG,AES,AES-CTR,SHA1,SHA256>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 2949750784 (2813 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <CN896 AWRDACPI>
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: <AES-CBC,SHA1,SHA256> on motherboard
acpi0: <CN896 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, b7de0000 (3) failed
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 3364 (P4M900) host to PCI bridge> on hostb0
agp0: aperture size is 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xd0000000-0xd7ffffff,0xdd000000-0xddfffff
f irq 16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <mass storage, SCSI> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vge0: <VIA Networking Velocity Gigabit Ethernet> port 0xcc00-0xccff mem 0xdfdff0
00-0xdfdff0ff irq 28 at device 0.0 on pci3
vge0: Using 1 MSI message
miibus0: <MII bus> on vge0
ip1000phy0: <IP1001 10/100/1000 media interface> PHY 1 on miibus0
ip1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000base
T-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
vge0: Ethernet address: 00:40:63:f9:f8:45
atapci0: <VIA 8237 SATA300 controller> port 0xfc00-0xfc07,0xf800-0xf803,0xf400-0
xf407,0xf000-0xf003,0xec00-0xec0f,0xe800-0xe8ff irq 21 at device 15.0 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,
0xe400-0xe40f at device 15.1 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 20 at device 16.0 on p
ci0
usbus0 on uhci0
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 22 at device 16.1 on p
ci0
usbus1 on uhci1
uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.2 on p
ci0
usbus2 on uhci2
uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 23 at device 16.3 on p
ci0
usbus3 on uhci3
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xdffff000-0xdffff0ff irq 21 at devic
e 16.4 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI Host-PCI bridge> on acpi0
pcib5: could not evaluate _ADR - AE_NOT_FOUND
pci128: <ACPI PCI bus> on pcib5
pci128: <multimedia, HDA> at device 1.0 (no driver attached)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
wbwd0: DevID 0x3c DevRev 0x02, will not attach, please report this.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor CentaurHauls, msr 80d101a0800101a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, loggi
ng disabled

Load Average 0.12, 0.11, 0.09

FreeNAS® © 2013 iXsystems, Inc.
Clear
ReCSS
Console
DOM
Object
Close
EXPERIMENTAL: dojox.timing -- APIs subject to change without notice.
EXPERIMENTAL: dojox.layout.ResizeHandle -- APIs subject to change without notice.
EXPERIMENTAL: dojox.grid.EnhancedGrid -- APIs subject to change without notice.
EXPERIMENTAL: dojox.grid.TreeGrid -- APIs subject to change without notice.
Shell
DUMMYNET 0xfffffe00025a11c0 with IPv6 initialized (100409)
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen3.1: <VIA> at usbus3
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <VIA> at usbus2
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <VIA> at usbus1
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <VIA> at usbus0
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen4.1: <VIA> at usbus4
uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device

Load Average 0.12, 0.11, 0.09

FreeNAS® © 2013 iXsystems, Inc.
Clear
ReCSS
Console
DOM
Object
Close
EXPERIMENTAL: dojox.timing -- APIs subject to change without notice.
EXPERIMENTAL: dojox.layout.ResizeHandle -- APIs subject to change without notice.
EXPERIMENTAL: dojox.grid.EnhancedGrid -- APIs subject to change without notice.
EXPERIMENTAL: dojox.grid.TreeGrid -- APIs subject to change without notice.
Shell
DUMMYNET 0xfffffe00025a11c0 with IPv6 initialized (100409)
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen3.1: <VIA> at usbus3
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <VIA> at usbus2
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <VIA> at usbus1
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <VIA> at usbus0
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen4.1: <VIA> at usbus4
uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device

Load Average 0.12, 0.11, 0.09

FreeNAS® © 2013 iXsystems, Inc.
Clear
ReCSS
Console
DOM
Object
Close
EXPERIMENTAL: dojox.timing -- APIs subject to change without notice.
EXPERIMENTAL: dojox.layout.ResizeHandle -- APIs subject to change without notice.
EXPERIMENTAL: dojox.grid.EnhancedGrid -- APIs subject to change without notice.
EXPERIMENTAL: dojox.grid.TreeGrid -- APIs subject to change without notice.
Shell
DUMMYNET 0xfffffe00025a11c0 with IPv6 initialized (100409)
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen3.1: <VIA> at usbus3
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <VIA> at usbus2
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <VIA> at usbus1
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <VIA> at usbus0
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen4.1: <VIA> at usbus4
uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device
:
Load Average 0.12, 0.11, 0.09

FreeNAS® © 2013 iXsystems, Inc.
Clear
ReCSS
Console
DOM
Object
Close
EXPERIMENTAL: dojox.timing -- APIs subject to change without notice.
EXPERIMENTAL: dojox.layout.ResizeHandle -- APIs subject to change without notice.
EXPERIMENTAL: dojox.grid.EnhancedGrid -- APIs subject to change without notice.
EXPERIMENTAL: dojox.grid.TreeGrid -- APIs subject to change without notice.
Shell
DUMMYNET 0xfffffe00025a11c0 with IPv6 initialized (100409)
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen3.1: <VIA> at usbus3
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <VIA> at usbus2
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <VIA> at usbus1
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <VIA> at usbus0
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen4.1: <VIA> at usbus4
uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
Timecounter "TSC" frequency 1615824248 Hz quality 1000
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <Slimtype DVD A DS8A3S HP52> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c
losed
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ufs/FreeNASs1a [ro]...
GEOM_RAID5: Module loaded, version 1.1.20130907.44 (rev 5c6d2a159411)
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)

zpool import accepts the commands and gives no output back.

Finally camcontrol:

[root@freenas ~]# camcontrol devlist
<Slimtype DVD A DS8A3S HP52> at scbus0 target 0 lun 0 (cd0,pass0)
<INTEL SSDSA2CT040G3 4PC10362> at scbus1 target 0 lun 0 (ada0,pass1)

I don't even remember the model of the card. I just remember it was PCIe and 4 sata ports. I can visually check this and report on it as well. Thanks again for the help.