11.2 beta1 iocage plex issue

[White95supra]

I have successfully installed plex as a iocage plugin on 11.2 beta1. Plex seems to be running just fine, but approx every 30 minutes I get alerts logged in plex that the connection was closed and then opened again.

• 4:25pm Opened connection to PlexMediaServer, listening for events.
• 4:25pm Connection to PlexMediaServer closed.
• 4:08pm Opened connection to PlexMediaServer, listening for events.
• 4:08pm Connection to PlexMediaServer closed.
• 3:28pm Opened connection to PlexMediaServer, listening for events.

Any one else have this same problem?

 

[dlavigne]

Hardware specs? Also post the outpout of ifconfig.

 

[White95supra]

Hardware:
Intel i5-3340s
Intel DH67CF
16gb ddr3

root ifconfig:

Code:

[root@freenas ~]# ifconfig
em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
		options=2098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
		ether e0:69:95:c3:6b:a9
		hwaddr e0:69:95:c3:6b:a9
		inet 10.0.1.101 netmask 0xffffff00 broadcast 10.0.1.255
		nd6 options=9<PERFORMNUD,IFDISABLED>
		media: Ethernet autoselect (1000baseT <full-duplex>)
		status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
		options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
		inet6 ::1 prefixlen 128
		inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
		inet 127.0.0.1 netmask 0xff000000
		nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
		groups: lo
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
		ether 02:6a:a3:ac:02:00
		nd6 options=9<PERFORMNUD,IFDISABLED>
		groups: bridge
		id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
		maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
		root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
		member: vnet0:1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
				ifmaxaddr 0 port 4 priority 128 path cost 2000
		member: em0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
				ifmaxaddr 0 port 1 priority 128 path cost 55
vnet0:1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
		description: associated with jail: plex
		options=8<VLAN_MTU>
		ether 02:ff:60:14:fa:09
		hwaddr 02:e1:d0:00:04:0a
		nd6 options=1<PERFORMNUD>
		media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
		status: active
		groups: epair

plex ifconfig:

Code:

root@plex:~ # ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
		options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
		inet6 ::1 prefixlen 128
		inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
		inet 127.0.0.1 netmask 0xff000000
		nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
		groups: lo
epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
		options=8<VLAN_MTU>
		ether 02:ff:60:14:fa:0a
		hwaddr 02:e1:d0:00:05:0b
		inet 10.0.1.102 netmask 0xff000000 broadcast 10.255.255.255
		nd6 options=1<PERFORMNUD>
		media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
		status: active
		groups: epair

 

[dlavigne]

Does the issue persist on BETA2?