Is there any tunable i have to use for this Dual Port - 40/10GBE card ?
Same card words with Windows 10 64bit, however the only difference is the rev 3 is in windows and rev1 of this card is in FreeNAS Server.. Please suggest how to best get it to work and best speeds as Peer to Peer between...
I recently updated to Freenas 11.2 U6 and installed the Plex app afterwards, since it didn't work after the update. I also defined the nameserver and the gateway so that I could access the Plex server via the web browser.
Shortly after I recognized, that my upload speed to the...
Freenas server to windows 10 client via 10Gb sfp+ copper.
In the past I've used s320e-cr chelsio cards on both server and client. Every so often the client crashes with bsod(blue screen) with tcpip.sys failure when browsing the server or copying FROM the server to client. However I can copy to...
This is my first topic after the self introduction one.
I wish I can have some advice from you communauts on the build I am planning.
I currently have a VM host computer (still testing several hypervisors, should move to ESXi in the next days) that through an UnRAID VM provides...
I've worked with VMWare for Years but i'm reasonably new to Freenas. I've soured the Forums for posts related to the issue i'm having and there doesn't seem to be any existing posts for this particular issue. So apologies if I've missed something. Here's my issue.
ESXI 6.7 Whitelist...
I recently upgraded my FreeNas server with one of these Mellanox MNPA19-XTR ConnectX-2 network cards. I run a direct fiber line from my server to my main desktop. This setup seemed to work perfectly at the start, even after giving the interface a IP and a subnetmask in the range of the...
cant configure the mellanox driver
i based on https://www.supermicro.com/products/system/1u/1027/sys-1027r-72brftp.cfm
include 2 1gb and 2 10gb
and i added melnox card 2x40
i see only 4 interfaces
igb0 Intel(R) PRO/1000 Network Connection
igb1 Intel(R) PRO/1000 Network Connection
just a quick question, as I can't find any recent information that is up to date right now [11/2018].
Is anyone using a Mellanox ConnectX-2 or ConnectX-3 SFP+ NIC along with Freenas 11.1 U6?
Do you have any issues or suggestions which one to pick?
The ConnectX-3's price seems to be...
I have a strange problem that I just noticed. I have 1 Freenas and 3 proxmox servers. All have a Mellanox ConnectX MT26448 card (10GBit). I have a switch with 4SFP+ ports. All ports on the switch show 10Gbit. All cards are, at least it seems to me, installed correctly. I did iperf tests...
I just got in a Mellanox Connectx-2 card and put it into my FreeNAS server.
I have been unsuccessful at getting it to work.
FreeNAS is able to see the card and i am able to see it in the command line network configuration of FreeNAS.
When I set it as the default nic and give it a static ip...
Just in case it's of interest or useful to someone, the (CX4) 10GbE modules for the old HP Procurve 3400cl switches seems to work decently with Mellanox cards in 10GbE mode. :)
(I had a bunch of computer and comms gear in storage overseas for a few years. It turned up earlier this...