Help needed, degraded state, I had drive DA4 show a fault, degraded state, I took the drive off line and replaced it, when this went "on line", the line "/dev/gptid...." came up, I then put DA4 on line. DA5 then went degraded. I tried resilvering nothing changed and I am not able to see any data...

i have a raidz1 with 8 ssds one had some issues and was marked as unavailable. i have set it to offline, swapped and selected replace. after some time, Pool status still have errors and it stays in degraded, what could be the reason ? should i try to replace it again?

Hello, (sorry for my bad English) I have an old FreeNAS-9.10.2-U6 (561f0d7a1) running on an old HP Prolian MIcroserver (first gen). Using two desktop Seagate 4TB disk in mirror setup. This is the current status: pool: zfs1 state: DEGRADED status: One or more devices has experienced an...

Hello there, maybe you can help me out. I just bought a WD Green m2 SSD as primary boot device in order to have a more reliable way of storing the boot data than using USB sticks which really tend to fail fast sometimes. anyways, I installed the latest stable freenas (10.2) on the m2 SSD and...

I have a 3 disk array right now. one of the harddrives is degraded. how do i swap out the drives. I only currenty have 3 drive locations on the PC itself. Can i just pull the one bad drive out and put in a new one. thank

Hi Guys, Looks like I have a pool in a degraded state, I think because the hotspares kicked in. This system is running FreeNAS 11.1-U4. Please take a look at this zpool status. I assume I need to detach the faulted drives and the spares will become permanent from what I have read...

Hi all, I am new to this forum and need some help on my encrypted pool. I have an encrypted 4 disks raidz1 pool. All disks are WD 4TB RE 7200rpm System specs are: Build FreeNAS-9.10.2-U6 (561f0d7a1) Platform Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz Memory 5985MB non-ECC Motherboard Asus B85M-G...

Hello, I have a pool on a general file server with 6 x 2TB drives configured in a three-group mirror that are very old. The system, for all intents and purposes, appears to be working normally. The pool does not report as degraded. However, I have been trying to move certain files using rsync...

I7 4790k 16 gb Ram Corsair vengeance 2400 mhz ddr3 asus maximus VI Hero hx750i PSU WD Green 3tb drives x 6 (Mirrored) FreeNAS-9.3-STABLE-201412090314 [root@freenas ~]# zpool import pool: Media id: 12090416692805278326 state: UNAVAIL...