Hi All,
My ZFS volume is degraded, as a drive had died.
I replaced the drive a couple of weeks ago, and very quickly (within around 12 hours) the Zpool Status command was showing that the resilver was 100% complete.
I did some Googling, which suggested that this wasn't unusual and to give it some time.
I've checked in today (it's a remote server used as a secondary backup, so not totally critical) and it's STILL resilvering.
A zpool status shows the following:
Any tips on what to do? Is it still ACTUALLY resilvering, or is it b0rked? :o)
Thanks,
Craig
Oh, it's FreeNAS 8.0.3-RELEASE-P1-x64 (9591)
My ZFS volume is degraded, as a drive had died.
I replaced the drive a couple of weeks ago, and very quickly (within around 12 hours) the Zpool Status command was showing that the resilver was 100% complete.
I did some Googling, which suggested that this wasn't unusual and to give it some time.
I've checked in today (it's a remote server used as a secondary backup, so not totally critical) and it's STILL resilvering.
A zpool status shows the following:
Code:
pool: Data state: DEGRADED status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://www.sun.com/msg/ZFS-8000-8A scrub: resilver in progress for 550h23m, 100.00% done, 0h0m to go config: NAME STATE READ WRITE CKSUM Data DEGRADED 0 0 31 raidz1 DEGRADED 0 0 62 ada0p2 ONLINE 0 0 0 replacing DEGRADED 0 0 0 8280195129692024807 UNAVAIL 0 0 0 was /dev/ada1p2/o ld ada1p2 ONLINE 0 0 0 62.1T resilvered ada2p2 ONLINE 0 0 0 ada3p2 ONLINE 0 0 0 ada4p2 ONLINE 0 0 0 ada5p2 ONLINE 0 0 0 ada6p2 ONLINE 0 0 0 ada7p2 ONLINE 0 0 0 ada8p2 ONLINE 0 0 0 ada9p2 ONLINE 0 0 0
Any tips on what to do? Is it still ACTUALLY resilvering, or is it b0rked? :o)
Thanks,
Craig
Oh, it's FreeNAS 8.0.3-RELEASE-P1-x64 (9591)