Monkey_Demon
Explorer
- Joined
- Nov 11, 2016
- Messages
- 85
After upgrading from FreeNAS to TrueNAS, I followed SpaceRex's excellent Install Plex on TrueNAS tutorial. But I ran into these problems with the IP addresses:
And looking at the other settings, do I need to do anything else?
- In my router I reserved 192.168.1.195 for the Plex Media Server (PMS).
- @ 13.17 the tutorial show how to get the IP address of the PMS: Jails > plex Jail > IPv4. In my case, this is 172.16.0.2/30.
- I try to modify this with Jails > plex Jail > Stop; Jails > plex Jail > Edit. But the IPv4 settings are grayed out and cannot be modified. I don't know how these settings got there, but they're wrong. The settings that seem most relevant are set as follows:
- DHCP Autoconfigure IPv4: unchecked
- NAT: checked
- VNET: checked
- Berkeley Packet Filter: unchecked
- vnet_default_interface: auto
- IPv4 interface: vnet0
- IPv4 address: 172.16.0.2
- IPv4 netmask: 30
- IPv4 default router: 172.16.0.1
- @ 14:00 the tutorial shows how to get the IP address of the admin portal: Plugins > plex > Admin portals. In my case this is http://192.168.1.191:32400/web
- The tutorial says to use this IP address to connect to the PMS. But when I do this, I get an error message: "This site can't be reached. 192.168.1.191 refused to connect."
And looking at the other settings, do I need to do anything else?