MalVeauX
Contributor
- Joined
- Aug 6, 2020
- Messages
- 110
Hey all,
SMB Share showing two names:
I'm not sure what I did. I originally had the shares made by making two groups and a single member and assigning permissions. Then I saw the name showed up on my network as "FREENAS" and I wanted it to be something else. So I redid everything, but this time, in the SMB service, I changed the name. I then updated the group, user and ACL just as before. Now the problem. The network location "FREENAS" persists and won't go away (rebooted both server & client machines). I see my new SMB service share name on the network, as "MALSERVER" as I wanted it to be. But "FREENAS" is still showing up too. I cannot access the "FREENAS" location. But I can access the "MALSERVER" location fine. I really would like that "FREENAS" location to go away. Yet I can't find anything in any of the SMB, groups, users, sharing, etc, where this name may exist in a list being used. Screen shot attached showing what I mean with a check next to what's good and I want to keep, and an X pointing at what I want to go away.
ACL issues:
Also, finally, I'm trying to set it up so that when I made a SMB share I can have two users. One for everyone, public basically, and one for restricted access. But when I set it up, I cannot access the restricted data set that is being shared.
I did this by doing:
Accounts -> Groups -> Made two groups, PublicAccess and RestrictedAccess.
I made two user accounts, let's say A (public user) & B (full access user) basically.
I added the users A & B to the group for PublicAccess. I put only user B into the RestrictedAccess group.
I then go to Storage -> Pool -> I make two data sets. One public, one restricted.
For the public data set, I edit ACL to include Group PublicAccess and set the ACL Options to Open.
For the restricted data set, I edit ACL to include Group RestrictedAccess and set the ACL Option to Restricted.
I'm sure I'm missing something!
Thanks!
Very best,
SMB Share showing two names:
I'm not sure what I did. I originally had the shares made by making two groups and a single member and assigning permissions. Then I saw the name showed up on my network as "FREENAS" and I wanted it to be something else. So I redid everything, but this time, in the SMB service, I changed the name. I then updated the group, user and ACL just as before. Now the problem. The network location "FREENAS" persists and won't go away (rebooted both server & client machines). I see my new SMB service share name on the network, as "MALSERVER" as I wanted it to be. But "FREENAS" is still showing up too. I cannot access the "FREENAS" location. But I can access the "MALSERVER" location fine. I really would like that "FREENAS" location to go away. Yet I can't find anything in any of the SMB, groups, users, sharing, etc, where this name may exist in a list being used. Screen shot attached showing what I mean with a check next to what's good and I want to keep, and an X pointing at what I want to go away.
ACL issues:
Also, finally, I'm trying to set it up so that when I made a SMB share I can have two users. One for everyone, public basically, and one for restricted access. But when I set it up, I cannot access the restricted data set that is being shared.
I did this by doing:
Accounts -> Groups -> Made two groups, PublicAccess and RestrictedAccess.
I made two user accounts, let's say A (public user) & B (full access user) basically.
I added the users A & B to the group for PublicAccess. I put only user B into the RestrictedAccess group.
I then go to Storage -> Pool -> I make two data sets. One public, one restricted.
For the public data set, I edit ACL to include Group PublicAccess and set the ACL Options to Open.
For the restricted data set, I edit ACL to include Group RestrictedAccess and set the ACL Option to Restricted.
I'm sure I'm missing something!
Thanks!
Very best,