soft_reset
Dabbler
- Joined
- Dec 19, 2019
- Messages
- 11
Good evening,
I would like to configure SMB Multichannel between one big 10Gbit/s nic in FreeNAS 11.2 and several 1Gbit/s nics on a Windows 10 machine.
From reading the guide I know that I would need a subnet per channel, so for example 4 subnets if I had 4x 1Gbit in each machine.
Could someone tell me how I would assign multiple IPs to my 10Gbit/s nic, so that I can use it in multiple subnets?
Does it even work that way, or am I misunderstanding something and this type of multichannel won't work with 1:n connections?
As for relevant hardware, I am using a Mellanox ConnectX3 in the FreeNAS 11.2 system, and several Intel PRO/1000 PT cards in the Windows 10 system.
They connect to a Mikrotik CSS326-24G-2S+RM.
Thank you for your time!
I would like to configure SMB Multichannel between one big 10Gbit/s nic in FreeNAS 11.2 and several 1Gbit/s nics on a Windows 10 machine.
From reading the guide I know that I would need a subnet per channel, so for example 4 subnets if I had 4x 1Gbit in each machine.
Could someone tell me how I would assign multiple IPs to my 10Gbit/s nic, so that I can use it in multiple subnets?
Does it even work that way, or am I misunderstanding something and this type of multichannel won't work with 1:n connections?
As for relevant hardware, I am using a Mellanox ConnectX3 in the FreeNAS 11.2 system, and several Intel PRO/1000 PT cards in the Windows 10 system.
They connect to a Mikrotik CSS326-24G-2S+RM.
Thank you for your time!