Windows Server 2003 R2 & FreeNAS 8
Hi,
I am setting up a test system at the moment, before launching the FreeNAS onto my network.
I am having great difficulty in getting this to work. The problem is probably that I don't fully understand what needs to go where, as I am a basic user of Active Directory and you could say a FreeNAS Virgin.
My Setup is as follows:-
Windows
Windows 2003 Server R2 Standard i386
Full Computer Name: dropserver.drop.local
Domain: drop.local
IP Address: 172.20.0.232 / 255.255.0.0
Router IP: 172.20.0.1
DNS Server: 172.20.0.232
DNS Configured both Forward Lookup Zone & Reverse Lookup Zone, with forwarders set to: 8.8.8.8 (Google) / 158.152.1.43 (my ISP) / 158.152.1.58 (my ISP)
Also added an entry for the Freenas: dropnas 172.20.0.230
FreeNAS Setup
FreeNAS: FreeNAS-8.0.1-BETA4-amd64
IP Address: 172.20.0.230 Subnet: 255.255.0.0/16
Hostname: dropnas
Domain: drop.local
IPv4 Default Gateway: 172.20.0.1
IPv6 Default Gateway:
Nameserver 1: 172.20.0.232
Nameserver 2:
Nameserver 3:
Active Directory Settings
Domain Controller Name: 172.20.0.232
Domain Name: drop.local
Host Name: DROP
Workgroup Name: DROP
Administrator Name: Administrator
Password: ******
CIFS Settings
Authentication Model: Local User
NetBIOS Name: DROPNAS
Workgroup: DROP
Description: DropNAS Server
DOS charset: CP437
UNIX charset: UTF-8
Local Master: yes
Time Server for Domain: yes
Guest Account: nobody
Allow Guest Access: no
Only Allow Guest Access: no
File Mask: none
Directory Mask: none
Large RW Support: yes
Send Files with sendfile(2): yes
EA Support: no
Support DOS File Attributes: yes
Allow Empty Password: no
Auxiliary parameters: none
Enable Home Directories: no
Enable Home Directories Browsing: no
Home directories: none
Enable AIO: yes
Minimal AIO read size: 1
Minimal AIO write size: 1
Both Active Directory and CIFS Services are switched ON.
I have then created a UFS share in Sharing > Windows called data which is at /mnt/disk1 with the following configuration:-
Name: data
Comment: data store
Path: /mnt/disk1
Export Read Only: no
Browable to Network Clients: yes
Inherit Permissions: no
Export Recycle Bin: no
Show hidden files: no
Guest Account: www
Allow Guest Access: no
Only Allow Guest Access: no
Hosts Allows: none
Hosts Deny: none
Auxilliary Parameters: none
With these settings set, I have now rebooted the FreeNAS unit, and all appears to be ok at the console screen with no obvious errors.
However, I still don't appear to be able to see my list of users from Active Directory in the list of Users in the FreeNAS unit.
If I turn off Active Directory service on the FreeNAS then start it again, I get this info from var/log/messages:-
Code:
Aug 31 14:28:58 dropnas freenas[1576]: Executing: /usr/sbin/service ix-kerberos quietstart
Aug 31 14:28:58 dropnas freenas[1576]: Executing: /usr/sbin/service ix-nsswitch quietstart
Aug 31 14:28:59 dropnas freenas: Generating host.conf.
Aug 31 14:28:59 dropnas freenas[1576]: Executing: /usr/sbin/service ix-pam quietstart
Aug 31 14:28:59 dropnas freenas[1576]: Executing: /usr/sbin/service ix-samba quietstart
Aug 31 14:28:59 dropnas freenas: tdbsam_open: Converting version 0.0 database to version 4.0.
Aug 31 14:28:59 dropnas freenas: tdbsam_convert_backup: updated /var/etc/private/passdb.tdb file.
Aug 31 14:28:59 dropnas freenas: Importing account for sshuser...ok
Aug 31 14:28:59 dropnas freenas[1576]: Executing: /usr/sbin/service ix-kinit quietstart
Aug 31 14:29:09 dropnas freenas[1576]: Executing: /usr/sbin/service ix-activedirectory quietstart
Aug 31 14:29:15 dropnas freenas: Using short domain name -- DROP
Aug 31 14:29:15 dropnas freenas: Joined 'DROP' to realm 'drop.local'
Aug 31 14:29:25 dropnas freenas[1576]: Executing: /usr/sbin/service samba forcestop
Aug 31 14:29:25 dropnas freenas: winbindd not running? (check /var/run/samba/winbindd.pid).
Aug 31 14:29:26 dropnas freenas: Stopping smbd.
Aug 31 14:29:26 dropnas freenas: Stopping nmbd.
Aug 31 14:29:26 dropnas freenas[1576]: Executing: /usr/bin/killall nmbd
Aug 31 14:29:26 dropnas freenas: No matching processes were found
Aug 31 14:29:26 dropnas freenas[1576]: Executing: /usr/bin/killall smbd
Aug 31 14:29:26 dropnas freenas: No matching processes were found
Aug 31 14:29:26 dropnas freenas[1576]: Executing: /usr/bin/killall winbindd
Aug 31 14:29:26 dropnas freenas: No matching processes were found
Aug 31 14:29:26 dropnas freenas[1576]: Executing: /usr/sbin/service samba quietstart
Aug 31 14:29:26 dropnas freenas: Removing stale Samba tdb files: ........ done
Aug 31 14:29:26 dropnas freenas: Starting nmbd.
Aug 31 14:29:26 dropnas freenas: Starting smbd.
Aug 31 14:29:26 dropnas freenas: Starting winbindd.
Can anyone tell if my settings are correct, or is there something totally obviously wrong that I am missing?
Any help would be greatly appreciated.
Regards,
Phil.
Additional Info:-
What I forgot to mention is that I have followed
mr_mike_m post on this thread (#6), but still struggling.
If I browse to My Network Places > Entire Network > Microsoft Windows Network > Drop > DropNAS Server (Drop) I then get asked for a username and password. I have to enter: admin / freenas (I have left password as default as this is only a test system).
I then see the DATA folder that I have created, but when I double click this I get:-
\\Drop\data is not accessible. You might not have permission to use this network resource. Contact the Administrator...... etc.