I've got a 6 drive RAIDZ2. I'm running 8.3. I started out with 4x2TB drives and 2x3TB drives but finally replaced all of the 2TB with 3TB drives. After replacing the last drive, it didn't automatically grow the volume so I dug around the forums to see what I missed. I found the "zpool online -e poolname device" command and ran it for each drive. It ran without a problem on all of my drives except one which gave me this error:
zpool online -e vol0 gptid/c1da9baa-3a62-11e2-b68d-f46d0473ba2f
cannot expand gptid/c1da9baa-3a62-11e2-b68d-f46d0473ba2f: no such device in pool
When I run zpool status, I get this:
[root@freenas] ~# zpool status
pool: vol0
state: ONLINE
scan: resilvered 1.38T in 9h55m with 0 errors on Thu Dec 6 04:38:04 2012
config:
NAME STATE READ WRITE CKSUM
vol0 ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/c52171ac-cd5d-11e1-bb5d-f46d0473ba2f ONLINE 0 0 0
gptid/83396047-d165-11e1-b3fe-f46d0473ba2f ONLINE 0 0 0
gptid/99f2a7bc-3a04-11e2-ba1d-f46d0473ba2f ONLINE 0 0 0
gptid/c1da9baa-3a62-11e2-b68d-f46d0473ba2f ONLINE 0 0 0
gptid/1e31f0fe-3e97-11e2-8ceb-f46d0473ba2f ONLINE 0 0 0
gptid/87ccd894-3f4e-11e2-92e0-f46d0473ba2f ONLINE 0 0 0
errors: No known data errors
Any ideas? Everything checks out fine and I've detached the old drives already. Thanks.
zpool online -e vol0 gptid/c1da9baa-3a62-11e2-b68d-f46d0473ba2f
cannot expand gptid/c1da9baa-3a62-11e2-b68d-f46d0473ba2f: no such device in pool
When I run zpool status, I get this:
[root@freenas] ~# zpool status
pool: vol0
state: ONLINE
scan: resilvered 1.38T in 9h55m with 0 errors on Thu Dec 6 04:38:04 2012
config:
NAME STATE READ WRITE CKSUM
vol0 ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/c52171ac-cd5d-11e1-bb5d-f46d0473ba2f ONLINE 0 0 0
gptid/83396047-d165-11e1-b3fe-f46d0473ba2f ONLINE 0 0 0
gptid/99f2a7bc-3a04-11e2-ba1d-f46d0473ba2f ONLINE 0 0 0
gptid/c1da9baa-3a62-11e2-b68d-f46d0473ba2f ONLINE 0 0 0
gptid/1e31f0fe-3e97-11e2-8ceb-f46d0473ba2f ONLINE 0 0 0
gptid/87ccd894-3f4e-11e2-92e0-f46d0473ba2f ONLINE 0 0 0
errors: No known data errors
Any ideas? Everything checks out fine and I've detached the old drives already. Thanks.