Hello,
I'm a new user to FreeNas and had a power failure in which my UPS was unable to handle the load. I was also in the middle of a backup which didn't complete, so getting my data back is extremely important. Here are the specifics of my build.
Motherboard: Gigabyte MB10-DS1
CPU - Intel Xeon D-1521
Memory - 64 gig DDR4 ECC
Hard Drive Boot Info: Supermicro Sata DOM 16gig - Boot
Hard Drives - Western Digital Red 4 TB. Set up into two raid one pools
Hard Disk Controller - Motherboard Sata connections
Network cards - Two Intel gigabit & one Mellanox 10gig
FreeNas - 11.2-U7
Here is the errors I received:
New alerts:
* Device: /dev/ada4, 1 Currently unreadable (pending) sectors
* Pool Tank-Striped-Mirrors state is UNKNOWN:
Current alerts:
* Device: /dev/ada4, 1 Currently unreadable (pending) sectors
* Pool Tank-Striped-Mirrors state is UNKNOWN:
I attempted to re-import the pool thru the GUI but it is not listed. Thru the online shell I ran zpool import.
root@yabu[~]# zpool import
pool: Tank-Striped-Mirrors
id: 18038504668976546327
state: ONLINE
action: The pool can be imported using its name or numeric identifier.
config:
Tank-Striped-Mirrors ONLINE
mirror-0 ONLINE
gptid/3a1d693c-8478-11e9-a729-1c1b0d044f6f ONLINE
gptid/3d96f869-8478-11e9-a729-1c1b0d044f6f ONLINE
mirror-1 ONLINE
gptid/41217073-8478-11e9-a729-1c1b0d044f6f ONLINE
gptid/44af77e9-8478-11e9-a729-1c1b0d044f6f ONLINE
My understanding is you do not want to import via the command line because the GUI won't see it.
How should I proceed?
I'm a new user to FreeNas and had a power failure in which my UPS was unable to handle the load. I was also in the middle of a backup which didn't complete, so getting my data back is extremely important. Here are the specifics of my build.
Motherboard: Gigabyte MB10-DS1
CPU - Intel Xeon D-1521
Memory - 64 gig DDR4 ECC
Hard Drive Boot Info: Supermicro Sata DOM 16gig - Boot
Hard Drives - Western Digital Red 4 TB. Set up into two raid one pools
Hard Disk Controller - Motherboard Sata connections
Network cards - Two Intel gigabit & one Mellanox 10gig
FreeNas - 11.2-U7
Here is the errors I received:
New alerts:
* Device: /dev/ada4, 1 Currently unreadable (pending) sectors
* Pool Tank-Striped-Mirrors state is UNKNOWN:
Current alerts:
* Device: /dev/ada4, 1 Currently unreadable (pending) sectors
* Pool Tank-Striped-Mirrors state is UNKNOWN:
I attempted to re-import the pool thru the GUI but it is not listed. Thru the online shell I ran zpool import.
root@yabu[~]# zpool import
pool: Tank-Striped-Mirrors
id: 18038504668976546327
state: ONLINE
action: The pool can be imported using its name or numeric identifier.
config:
Tank-Striped-Mirrors ONLINE
mirror-0 ONLINE
gptid/3a1d693c-8478-11e9-a729-1c1b0d044f6f ONLINE
gptid/3d96f869-8478-11e9-a729-1c1b0d044f6f ONLINE
mirror-1 ONLINE
gptid/41217073-8478-11e9-a729-1c1b0d044f6f ONLINE
gptid/44af77e9-8478-11e9-a729-1c1b0d044f6f ONLINE
My understanding is you do not want to import via the command line because the GUI won't see it.
How should I proceed?
Last edited: