Resilvering while disk UNAVAIL

[jchan94]

FreeNAS-9.3-STABLE-201509022158
8 RED 4TB disks ; raidz2

Had a drive go out, and now it's resilvering, but it says that the disk I replaced is "UNAVAIL".

Do I have anything to worry? I'm "zpool status" in terminal and see that the resilvering is progressing.

 

[Bidule0hm]

No, but just to be sure can you post the output of zpool status, between code tags for the readability, please?

 

[jchan94]

No, but just to be sure can you post the output of zpool status, between code tags for the readability, please?

Sorry, code tags?

This may be it...

pool: st0Rinat0r
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Tue Oct 27 17:32:21 2015
1.17T scanned out of 5.28T at 274M/s, 4h22m to go
73.0G resilvered, 22.11% done

 

[jchan94]

The disk also shows as

"7181964709327738089 UNAVAIL 0 0 0 was /dev/gptid/51027ef6-7d0b-11e5-a208-d0509946c614" :\

 

[Bidule0hm]

Sorry, code tags?

[ code ] the text... [ /code ] without the spaces.

I need the whole output, not just a part.

 

[jchan94]

[ code ] the text... [ /code ] without the spaces.

I need the whole output, not just a part.

pool: freenas-boot
state: ONLINE
scan: resilvered 521M in 0h1m with 0 errors on Wed Oct 7 01:39:41 2015
config:

NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gptid/926fa6dd-6cbe-11e5-af52-d0509946c614 ONLINE 0 0 0
gptid/baa4694c-6cce-11e5-91df-d0509946c614 ONLINE 0 0 0

errors: No known data errors

pool: st0Rinat0r
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Tue Oct 27 17:32:21 2015
2.09T scanned out of 5.28T at 334M/s, 2h46m to go
73.0G resilvered, 39.59% done
config:

NAME STATE READ WRITE CKSUM
st0Rinat0r DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 0
gptid/20da6b85-4dd7-11e5-ba0a-d0509946c614 ONLINE 0 0 0
7181964709327738089 UNAVAIL 0 0 0 was /dev/gptid/51027ef6-7d0b-11e5-a208-d0509946c614
gptid/247e3f15-4d6c-11e5-a578-d0509946c614 ONLINE 0 0 0
gptid/24dad928-4d6c-11e5-a578-d0509946c614 ONLINE 0 0 0
gptid/253a40f6-4d6c-11e5-a578-d0509946c614 ONLINE 0 0 0
gptid/2596766c-4d6c-11e5-a578-d0509946c614 ONLINE 0 0 0
gptid/25f0a6e7-4d6c-11e5-a578-d0509946c614 ONLINE 0 0 0
gptid/264b2647-4d6c-11e5-a578-d0509946c614 ONLINE 0 0 0

errors: No known data errors

 

[Bidule0hm]

Where are the code tags?

Man, it's the third time today I ask for code tags and I get the output without them. I think we need an automatic ban for anyone who post commands outputs without code tags...

If I ask them it's because it's important. Usually it's because the output is just very hard to read without formatting but in this case it's also because I just can't see how the drives are positioned in the vdev.

 

[jchan94]

Where are the code tags?

Man, it's the third time today I ask for code tags and I get the output without them. We need an automatic ban for anyone who post commands outputs without code tags...

If I ask them it's because it's important. Usually it's because the output is just very hard to read without formatting but in this case it's also because I just can't see how the drives are positioned in the vdev.

that's the output I get when I get from zpool status....

 

[Bidule0hm]

Well, plan B, can you paste the output to http://pastebin.com/ and post the link please?

 

[Robert Trevellyan]

that's the output I get when I get from zpool status....

The idea is to paste that output into your message between code tags, to make it readable.

 

[SweetAndLow]

Man this thread was hard to read as a bystander.

Can you also post your hardware? It's strange how the disk isn't showing as replacing. How did you replace the drive?

 

[Robert Trevellyan]

Signature says:
Xeon E3 1246V
32GB ECC Crucial RAM @ 1066
LSI 2308 SAS Controller
8 x 4TB (WD RED) RAID-Z2

@jchan94, please note that people using mobile devices don't see signatures. It's OK to have your specs there for decoration, but when seeking help you should put them in the body of your post.