Tears4Fears
Cadet
- Joined
- Jul 8, 2013
- Messages
- 5
Hello everyone!
In my personal project: Build Your Own NAS (BYON) , i have achieved the following results with my FreeNAS build.
Setup details
OS: FreeNAS-8.3.1-RELEASE-x64 (r13425)
CPU/Mobo: ECS NM70-I2 (V1.0)
Memory: Kingston 1600MHZ 8GB DDR3
Power Supply: 130W PicoPSU & Dell 150W power adapter
HDD1: WD Green 2TB (64MB/5400RPM)
HDD2: Seagate Bar-Green 2TB (64MB/5900RPM)
HDD3: Samsung EcoGreen F4 (32MB/5400RPM)
USB thumbdrive 4Gb
You can refer to more tests details and printscreens here.
Also, this is how I carried out my testing methods.
I need some opinions here:
1. Any thoughts about my tests results?
2. If you've noticed, the read speed is rather moderate, do you have some suggestions to improve it?
In my personal project: Build Your Own NAS (BYON) , i have achieved the following results with my FreeNAS build.
Setup details
OS: FreeNAS-8.3.1-RELEASE-x64 (r13425)
CPU/Mobo: ECS NM70-I2 (V1.0)
Memory: Kingston 1600MHZ 8GB DDR3
Power Supply: 130W PicoPSU & Dell 150W power adapter
HDD1: WD Green 2TB (64MB/5400RPM)
HDD2: Seagate Bar-Green 2TB (64MB/5900RPM)
HDD3: Samsung EcoGreen F4 (32MB/5400RPM)
USB thumbdrive 4Gb


You can refer to more tests details and printscreens here.
Also, this is how I carried out my testing methods.
I need some opinions here:
1. Any thoughts about my tests results?
2. If you've noticed, the read speed is rather moderate, do you have some suggestions to improve it?