p440ar vs 88SE9215

Status
Not open for further replies.

retroman

Dabbler
Joined
Nov 18, 2018
Messages
15
hello,

I will use 4x8tb ironwolf sata drives in hp ml350 gen9
Will I see any difference between p440ar (hba mode) and cheap marvell 88SE9215 ?
 

kdragon75

Wizard
Joined
Aug 7, 2016
Messages
2,457
One is far more likely to fail that the other. Both should "work" in theory as both seem to be probably supported. Why not go with a known good and supported LSI 2008 based card?
 

retroman

Dabbler
Joined
Nov 18, 2018
Messages
15
fiy :
I use a hp ml350 gen9
- p440ar make the fans sound like a rocket. even upgraded to 6.60 firmware. The only way to shut the noise was to put windows. tried to hyperv freenas but very poor performance.
- p440ar (hba mode) did not seem to give hdd temp

So I removed the p440, I went to marvell 88SE9215. I did not try the b140i which is on the mainboard. I may try later.
 
Status
Not open for further replies.
Top