iliak
Contributor
- Joined
- Dec 18, 2018
- Messages
- 148
Hi, i should get the server in a day or two
the configuration for the server:
what is the optimal configuration for the 8*ssd ,z1? or 4*2 ? the pool will be for non production use, and will be updated once a day for approx (3GB of new data)
the container will hold approx 1000 files each with average of 2GB)
the storage should support relatively low iops (up to 100 requests in second). but very high throughput (each request can be for a 500GB data) if it possible to configure it as first request firsd servers would be best.
the configuration for the server:
- SuperMicro Server 1U 1027R-72BRFTP
- CPU 2 X E5- 2630v2 CPU's
- RAM 64GB ecc
- BOOT DRIVE - SATADIMM - VIKING TECHNOLOGY SATADIMM 100GB
- Controller AOC-S2308L-L8e
- Mellanox ConnectX-3 40Gigabit ( will be connected to compatible switch)
- STORAGE 8x800gb SSD sas 6 - will be used for read only pool ( will be updated once a day)
- fusion io 1.2tb (mlc ssd )- will be used as network cache and temporary shared folder for some tasks(will be deleted daily)
what is the optimal configuration for the 8*ssd ,z1? or 4*2 ? the pool will be for non production use, and will be updated once a day for approx (3GB of new data)
the container will hold approx 1000 files each with average of 2GB)
the storage should support relatively low iops (up to 100 requests in second). but very high throughput (each request can be for a 500GB data) if it possible to configure it as first request firsd servers would be best.
Last edited: