SOLVED only one of four nics i354 active

Status
Not open for further replies.

berbox

Dabbler
Joined
Jul 18, 2014
Messages
16
Good evening,

I wanted to add a link aggregation interface to my config as I realized that only igb0 is really working.
igb1-3 give in ifconfig.
status: no carrier
and no led (of the three) is showing up on cable-connection.

The i354 nics are on a supermicro a1sri-2558f board.

Thank you in advance
 

jgreco

Resident Grinch
Joined
May 29, 2011
Messages
18,680
You need to have the interfaces configured up prior to a link being indicated. "ifconfig igb1 up" etc.
 

berbox

Dabbler
Joined
Jul 18, 2014
Messages
16
Thank you for your answer!

Yes, I've tried this and some other things, but it didn't work.
The funny thing: what finally worked, was rebooting into live-ubuntu as I wanted to check if the board nics were even working... One live system reboot actually solved the problem. The led-lights went on and rebooting freenas it could bring them up in the startup process too.
What was that?
 
Status
Not open for further replies.
Top