Media permission and CIFS issue

Status
Not open for further replies.
J

jaypetermen

Dabbler
Joined
Apr 1, 2015
Messages
22
I think that I am having permission issues since I can not add the download directories in SABNZBD (it reverts back to is defaults i.e.; /var/db/sabnzbd/Downloads/incomplete ) and I am not modify any files from my Windows 7 pc.

My folder structure is as follows:

plex
plex
jails
media

The Storage permission settings for the following directory plex and it's to childern (jails and media):
  • Apply Owner (user): checked
  • Owner (user): root
  • Apply Owner (group):checked
  • Owner (group): wheel
  • Apply Mode: checked
  • Mode: all checked but Write > Other
  • Permission Type: Unix
  • Set permission recursively: checked (while changing permissions)
CIFS share
  • Path: /mnt/plex/media
  • Use as home share: not checked
  • Name: media
  • Apply Default Permissions: checked
  • Allow Guest Access: checked

dmesg
Code:
arp: ac:9e:17:
39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!                                                              
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0                                                    
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!


ifconfig
Code:
 
Shell
        status: active                                                                                                              
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536                                                                          
        nd6 options=9<PERFORMNUD,IFDISABLED>                                                                                        
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384                                                                  
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>                                                                      
        inet6 ::1 prefixlen 128                                                                                                    
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7                                                                                  
        inet 127.0.0.1 netmask 0xff000000                                                                                          
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>                                                                                  
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500                                                      
        ether 02:16:1b:06:72:00                                                                                                    
        nd6 options=1<PERFORMNUD>                                                                                                  
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15                                                                
        maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200                                                                    
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0                                                                    
        member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>                                                              
                ifmaxaddr 0 port 9 priority 128 path cost 2000                                                                      
        member: epair2a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>                                                              
                ifmaxaddr 0 port 11 priority 128 path cost 2000                                                                    
        member: epair3a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>                                                              
                ifmaxaddr 0 port 12 priority 128 path cost 2000                                                                    
        member: epair1a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>                                                              
                ifmaxaddr 0 port 10 priority 128 path cost 2000                                                                    
        member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>                                                                  
                ifmaxaddr 0 port 5 priority 128 path cost 20000                                                                    
epair1a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500                                              
        options=8<VLAN_MTU>                                                                                                        
        ether 02:e0:dd:00:0a:0a                                                                                                    
        nd6 options=1<PERFORMNUD>                                                                                                  
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)                                                                        
        status: active                                                                                                              
epair3a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500                                              
        options=8<VLAN_MTU>                                                                                                        
        ether 02:c8:d2:00:0c:0a                                                                                                    
        nd6 options=1<PERFORMNUD>                                                                                                  
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)                                                                        
        status: active                                                                                                              
epair2a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500                                              
        options=8<VLAN_MTU>                                                                                                        
        ether 02:d6:e0:00:0b:0a                                                                                                    
        nd6 options=1<PERFORMNUD>                                                                                                  
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)                                                                        
        status: active                                                                                                              
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500                                              
        options=8<VLAN_MTU>                                                                                                        
        ether 02:f6:cc:00:09:0a                                                                                                    
        nd6 options=1<PERFORMNUD>                                                                                                  
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)                                                                        
        status: active                                                                                                              
[root@freenas ~]#


FreeNAS build:
  • FreeNAS-9.3-STABLE-201511280648
System hardware:
  • CPU: AMD A6-5400K Trinity Dual-Core 3.6GHz (3.8GHz Turbo)
  • Motherboard:ASUS A55BM-PLUS/CSM FM2+ / FM2 AMD A55 (Hudson D2)
  • Power Supply:CORSAIR CX series CX500 500W ATX12V v2.3 80 PLUS B
  • Ram: G.SKILL Value 24GB 240-Pin DDR3 SDRAM DDR3 1600
  • Hard Drive:3x WD Red 3TB NAS Hard Drive: 1 to 8-bay RAID Hard Drive: 3.5-inch SATA 6 Gb/s
Network:
  • Ethernet
 
J

jaypetermen

Dabbler
Joined
Apr 1, 2015
Messages
22
Looks like the folder structure of my post came was flatted.

  • mnt (actuality called plex)
  • mnt/plex
  • mnt/plex/jails
  • mnt/plex/media
 
ChiknNutz

ChiknNutz

Patron
Joined
Nov 6, 2015
Messages
217
I had untold amounts of grief trying to get this sorted out myself. The first thing that comes to mind is, are you sure that you have set up the Jail storage properly?

What I ended up doing when I needed to change a jail storage, right or wrong, was as follows because I found just trying to EDIT them did not produce the desired result and led to odd and undesirable behavior.
  1. Turn off the plug-in
  2. Delete the jail storage
  3. Recreate the jail storage
  4. Turn the plug-in back on
  5. Recreate the appropriate link within the plug-in GUI.
 
J

jaypetermen

Dabbler
Joined
Apr 1, 2015
Messages
22
I have performed 1-4 probably ten time over the last couple days. With different results every time, but always some sort of permissions issue with the plugins.

However, I am not sure what is involved to do #5?
 
J

jaypetermen

Dabbler
Joined
Apr 1, 2015
Messages
22
Today I deleted my Windows Share and changed Storage permission settings for the following directory plex and it's to childern (jails and media):
  • Apply Owner (user): checked
  • Owner (user): nobody
  • Apply Owner (group):checked
  • Owner (group): nogroup
  • Apply Mode: checked
  • Mode: all checked but Write > Other
  • Permission Type: Windows
  • Set permission recursively: checked (while changing permissions)
The Plex, Couch Potato, and Sonar plugins started okay and I was able to add existing TV series to Sonar.

I can also now delete /media files from Windows 7

The SabNZB plugin would not start, even after restarting it's jail. So I deleted it's storage and then the plug in. I reinstalled it and then added /media as storage. Now it starts.

However, I am still getting the following errer when I try to add /media folders and they dont' take:
ERROR: download_dir directory: /media/downloads/incomplete error accessing

dmesg
Code:
Shell
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!
arp: ac:9e:17:39:e3:29 attempts to modify permanent entry for 192.168.0.8 on re0
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!
arp: 192.168.0.8 moved from ac:9e:17:39:e3:29 to 02:cb:c6:00:0c:0b on epair1b
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: Ethernet address: 02:75:91:00:0b:0a
epair2b: Ethernet address: 02:75:91:00:0d:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair2b
arp: ac:9e:17:39:e3:29 is using my IP address 192.168.0.8 on epair2b!
ifa_del_loopback_route: deletion failed
Freed UMA keg (udp_inpcb) was not empty (20 items). Lost 2 pages of memory.
Freed UMA keg (udpcb) was not empty (336 items). Lost 2 pages of memory.
Freed UMA keg (tcptw) was not empty (100 items). Lost 2 pages of memory.
Freed UMA keg (tcp_inpcb) was not empty (30 items). Lost 3 pages of memory.
Freed UMA keg (tcpcb) was not empty (20 items). Lost 5 pages of memory.
Freed UMA keg (ripcb) was not empty (20 items). Lost 2 pages of memory.
hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
arp: 192.168.0.6 moved from 02:75:91:00:0b:0a to ac:22:0b:52:10:9a on epair2b
arp: 192.168.0.6 moved from 02:f6:cc:00:09:0a to ac:22:0b:52:10:9a on epair0b
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: Ethernet address: 02:22:62:00:0b:0a
epair2b: Ethernet address: 02:22:62:00:0d:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair2b
ifa_del_loopback_route: deletion failed
Freed UMA keg (udp_inpcb) was not empty (20 items). Lost 2 pages of memory.
Freed UMA keg (udpcb) was not empty (336 items). Lost 2 pages of memory.
Freed UMA keg (tcptw) was not empty (100 items). Lost 2 pages of memory.
Freed UMA keg (tcp_inpcb) was not empty (30 items). Lost 3 pages of memory.
Freed UMA keg (tcpcb) was not empty (16 items). Lost 4 pages of memory.
hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
arp: 192.168.0.6 moved from 02:22:62:00:0b:0a to ac:22:0b:52:10:9a on epair2b
arp: 192.168.0.8 moved from 02:cb:c6:00:0c:0b to ac:9e:17:39:e3:29 on epair1b
[root@freenas ~]#
[root@freenas ~]#


ifconfig
Code:
status: active
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
nd6 options=9<PERFORMNUD,IFDISABLED>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:16:1b:06:72:00
nd6 options=1<PERFORMNUD>
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: epair2a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 11 priority 128 path cost 2000
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 9 priority 128 path cost 2000
member: epair3a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 12 priority 128 path cost 2000
member: epair1a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 10 priority 128 path cost 2000
member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 5 priority 128 path cost 20000
epair1a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:e0:dd:00:0a:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
epair3a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:c8:d2:00:0c:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:f6:cc:00:09:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
epair2a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:22:62:00:0b:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
[root@freenas ~]#
 
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
You should never change the permissions of your root dataset. In this case that means you can't change the permissions of plex dataset. If you want to have something you can share you need to create something like media and use that for sharing and mounting.
 
Status
Not open for further replies.

Important Announcement for the TrueNAS Community.

The TrueNAS Community has now been moved. This forum will now become READ-ONLY for historical purposes. Please feel free to join us on the new TrueNAS Community Forums.

Related topics on forums.truenas.com for thread: "Media permission and CIFS issue"

Similar threads

X
  • Locked
SOLVED arp: xx:xx:xx:f0:7a:2f attempts to modify permanent entry for 192.168.1.1 on epair1b
Replies
1
Views
4K
Xelas
X
dhenzler
arp: attempts to modify permanent entry for 192.168.15.100 on re0
Replies
4
Views
2K
dhenzler
dhenzler
D
  • Locked
Cifs - Windows/Ubuntu - Encoding Problem
Replies
2
Views
4K
Dominik K.
D
R
  • Locked
Security Log Output question
Replies
1
Views
2K
dlavigne
D
Nicholas
  • Locked
Que significa este mensaje: Security Run Output
Replies
2
Views
2K
Nicholas
Nicholas
Top