I have aquired some pci-e 2 port sata II cards based on the Jmicron JMB 360/363 chipset. The disks atached to these cards are seen in the bios but are not present when FreeNAS 8 has booted.
From the HCL these cards should be supported by the ATA(4) driver.
The JMicron JMB 360/363 contoller on the mother board is detected fine and disks connected to it are visible in FreeNAS.
What to do next?
From the HCL these cards should be supported by the ATA(4) driver.
The JMicron JMB 360/363 contoller on the mother board is detected fine and disks connected to it are visible in FreeNAS.
What to do next?